P0451 2005 Infiniti G35 Code - EVAP Control System Pressure Sensor Performance
Quick Answer
The Evaporative Emission System (EVAP) control system pressure sensor detects pressure in the purge line. Common causes include Faulty Evaporative Emission System (EVAP) Pressure Sensor, Evaporative Emission System (EVAP) Pressure sensor harness is open or shorted, Evaporative Emission System (EVAP) Pressure sensor circuit poor electrical connection. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
- What it means
- P0451 2005 Infiniti G35 indicates EVAP Control System Pressure Sensor Performance.
- Common causes
- Common causes include Faulty Evaporative Emission System (EVAP) Pressure Sensor, Evaporative Emission System (EVAP) Pressure sensor harness is open or shorted, Evaporative Emission System (EVAP) Pressure sensor circuit poor electrical connection.
- Severity
- Low - monitor the vehicle and repair when practical.
- Can I drive?
- The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
Code P0451 2005 Infiniti G35 Description
What are the Possible Causes of the DTC P0451 2005 Infiniti G35?
- Faulty Evaporative Emission System (EVAP) Pressure Sensor
- Evaporative Emission System (EVAP) Pressure sensor harness is open or shorted
- Evaporative Emission System (EVAP) Pressure sensor circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P0451 2005 Infiniti G35?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0451 2005 Infiniti G35 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0451 2005 Infiniti G35 code?
Need more information on how to fix the P0451 2005 Infiniti G35 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0451 2005 Infiniti G35 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0451 2005 Infiniti G35 Code
What does OBDII code P0451 mean for a 2005 Infiniti G35?
Code P0451 indicates an issue with the EVAP Control System Pressure Sensor, meaning the sensor is not providing accurate pressure readings to the engine control module (ECM).
What are the symptoms of code P0451 in a 2005 Infiniti G35?
Common symptoms include the check engine light turning on, a possible fuel smell near the vehicle, and decreased fuel efficiency.
What causes the P0451 code on a 2005 Infiniti G35?
Common causes include a faulty EVAP pressure sensor, damaged wiring or connectors, a clogged EVAP vent valve, or a malfunctioning ECM.
Can I drive my 2005 Infiniti G35 with a P0451 code?
While the car may still drive, it's not recommended to ignore the issue as it can affect emissions performance and could lead to further complications.
How do I fix the P0451 code on a 2005 Infiniti G35?
Repairs typically involve checking and replacing the EVAP pressure sensor, inspecting and repairing wiring or connectors, or cleaning/replacing the EVAP vent valve.
How do I diagnose the P0451 code in a 2005 Infiniti G35?
Start by using an OBDII scanner to confirm the code, then inspect the EVAP pressure sensor, wiring, connectors, and vent valve for damage or blockages.
Can a loose gas cap cause the P0451 code?
While a loose gas cap is more likely to trigger codes like P0455 or P0457, it’s worth checking as it can sometimes impact the EVAP system’s functionality.
How much does it cost to repair the P0451 code on a 2005 Infiniti G35?
The cost varies, but replacing the EVAP pressure sensor typically ranges from $150 to $300, depending on labor rates and part prices.
Will clearing the P0451 code fix the problem?
Clearing the code may turn off the check engine light temporarily, but the underlying issue must be addressed to prevent the code from returning.
What tools are needed to diagnose and fix the P0451 code?
You’ll need an OBDII scanner, a multimeter for electrical testing, and basic hand tools to inspect and replace EVAP system components.
Discuss the causes and fixes for P0451 2005 Infiniti G35 OBDII Code
Code P0451 2005 Infiniti G35 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
