AutoCodes
 
OBDII Code List
 
P0449 MERCEDES-BENZ

P0449 MERCEDES-BENZ - Evaporative Emission Control System Vent Valve/Solenoid Circuit Malfunction

Repair Importance Level: 1/3
Repair Difficulty Level: 3/3   
Comments  |  Add Comment

Possible causes

  • Purge Control Valve harness is open or shorted
  • Purge Control Valve electrical circuit poor connection
  • Faulty canister vent control valve

When is the code detected?

The Engine Control Module (ECM) has determined that a malfunction exists in the electrical circuit for the vent valve/solenoid in the evaporative emission control system.

Possible symptoms

  • Engine Light ON (or Service Engine Soon Warning Light)

P0449 Mercedes-benz Description

The Evaporative Emission System (EVAP) canister vent control valve is located on the EVAP canister and is used to seal the canister vent. This solenoid (the EVAP canister vent control valve) responds to signals from the Engine Control Module (ECM). When the ECM sends an ON signal, the coil in the solenoid valve is energized.

A plunger will then move to seal the canister vent. The ability to seal the vent is necessary for the on board diagnosis of other evaporative emission control system components.

This solenoid valve is used only for diagnosis, and usually remains opened. When the vent is closed, under normal purge conditions, the evaporative emission control system is depressurized and allows EVAP Control System (Small Leak) diagnosis.

OBDII Code P0449 Mercedes-benz - Evaporative Emission Control System Vent Valve/Solenoid Circuit Malfunction - AutoCodes.com

Need more help?

Get the P0449 Mercedes-benz code diagnosed by a professional: Find a repair shop in your area

Related Information

P0449 MERCEDES-BENZ Comments

Help us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the P0449 Mercedes-benz code? Have you replaced any parts?
Any information is appreciated. Thanks
Top ⇧