P0447 2012 Nissan Rogue Code - Evaporative Emission Control System Vent Control Circuit Open
Quick Answer
The Evaporative Emission System (EVAP) canister vent control valve is located on the EVAP canister and is used to seal the canister vent. Common causes include Faulty Canister Vent Control Valve, Canister Vent Control Valve harness is open or shorted, Canister Vent Control Valve electrical circuit poor connection. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
- What it means
- P0447 2012 Nissan Rogue indicates Evaporative Emission Control System Vent Control Circuit Open.
- Common causes
- Common causes include Faulty Canister Vent Control Valve, Canister Vent Control Valve harness is open or shorted, Canister Vent Control Valve electrical circuit poor connection.
- Severity
- Low - monitor the vehicle and repair when practical.
- Can I drive?
- The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
Code P0447 2012 Nissan Rogue Description
A plunger will then move to seal the canister vent. The ability to seal the vent is necessary for the on board diagnosis of other evaporative emission control system components.This solenoid valve is used only for diagnosis, and usually remains opened. When the vent is closed, under normal purge conditions, the evaporative emission control system is depressurized and allows EVAP Control System (Small Leak) diagnosis.
What are the Possible Causes of the DTC P0447 2012 Nissan Rogue?
- Faulty Canister Vent Control Valve
- Canister Vent Control Valve harness is open or shorted
- Canister Vent Control Valve electrical circuit poor connection
How to Fix the DTC P0447 2012 Nissan Rogue?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0447 2012 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0447 2012 Nissan Rogue code?
Need more information on how to fix the P0447 2012 Nissan Rogue code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0447 2012 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0447 2012 Nissan Rogue Code
1. What is OBDII code P0447 on a 2012 Nissan Rogue?
- OBDII code P0447 on a 2012 Nissan Rogue indicates a problem with the Evaporative Emission Control System Vent Control Circuit being open.
2. What are the common symptoms of OBDII code P0447 on a 2012 Nissan Rogue?
- Common symptoms of P0447 may include the Check Engine Light being illuminated, poor fuel economy, and a gasoline odor near the vehicle.
3. What are the possible causes of OBDII code P0447 on a 2012 Nissan Rogue?
- Possible causes of P0447 can include a faulty vent control valve, damaged wiring or connectors in the vent control circuit, or a malfunctioning ECM (Engine Control Module).
4. How can I diagnose OBDII code P0447 on my 2012 Nissan Rogue?
- Diagnosing P0447 typically involves using an OBDII scanner to retrieve the code, inspecting the vent control valve and related components, and checking for any loose or damaged wiring.
5. Can I still drive my 2012 Nissan Rogue with OBDII code P0447?
- While the vehicle may still be operable with P0447, it is recommended to address the issue promptly to prevent potential damage to the emission control system and ensure optimal performance.
6. How do I repair OBDII code P0447 on a 2012 Nissan Rogue?
- Repairing P0447 often involves replacing the vent control valve, repairing or replacing damaged wiring or connectors, and clearing the fault code with an OBDII scanner.
7. Is it possible to reset OBDII code P0447 on a 2012 Nissan Rogue without repairs?
- While clearing the code with an OBDII scanner may temporarily reset P0447, the underlying issue causing the fault will likely trigger the code again if not properly addressed.
8. Are there any DIY tips for fixing OBDII code P0447 on a 2012 Nissan Rogue?
- DIY tips for addressing P0447 include checking for loose connections, ensuring proper vent control valve operation, and inspecting the wiring for any visible damage before seeking professional help if needed.
9. Can extreme weather conditions affect OBDII code P0447 on a 2012 Nissan Rogue?
- Extreme weather conditions can potentially exacerbate issues related to P0447, such as causing wiring to become brittle or affecting the operation of the vent control valve due to temperature variations.
10. What should I do if OBDII code P0447 on my 2012 Nissan Rogue keeps recurring after repairs?
- If P0447 keeps recurring after repairs, it is advisable to have a thorough diagnostic check performed by a qualified mechanic to identify any underlying issues that may be contributing to the persistent fault.
Discuss the causes and fixes for P0447 2012 Nissan Rogue OBDII Code
Code P0447 2012 Nissan Rogue comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
