P0445 Audi Code - EVAP System Purge Control Valve Circuit Shorted
Quick Answer
The Evaporative Emission System (EVAP) Canister Purge Volume Control Solenoid Valve controls flow rate of fuel vapor from the EVAP canister. Common causes include Faulty Evaporative Emission (EVAP) Purge Solenoid Control, Evaporative Emission (EVAP) Purge Solenoid Control harness is open or shorted, Evaporative Emission (EVAP) Purge Solenoid Control circuit poor electrical connection. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
- What it means
- P0445 Audi indicates EVAP System Purge Control Valve Circuit Shorted.
- Common causes
- Common causes include Faulty Evaporative Emission (EVAP) Purge Solenoid Control, Evaporative Emission (EVAP) Purge Solenoid Control harness is open or shorted, Evaporative Emission (EVAP) Purge Solenoid Control circuit poor electrical connection.
- Severity
- Low - monitor the vehicle and repair when practical.
- Can I drive?
- The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
Code P0445 Audi Description
The EVAP canister purge volume control solenoid valve uses a ON/OFF duty to control the flow rate of fuel vapor from the EVAP canister. The EVAP canister purge volume control solenoid valve is moved by ON/OFF pulses from the ECM. The longer the ON pulse, the greater the amount of fuel vapor that will flow through the valve.
What are the Possible Causes of the DTC P0445 Audi?
- Faulty Evaporative Emission (EVAP) Purge Solenoid Control
- Evaporative Emission (EVAP) Purge Solenoid Control harness is open or shorted
- Evaporative Emission (EVAP) Purge Solenoid Control circuit poor electrical connection
How to Fix the DTC P0445 Audi?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0445 Audi code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0445 Audi code?
Need more information on how to fix the P0445 Audi code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0445 Audi code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0445 Audi Code
1. What does OBDII code P0445 for an Audi indicate?
The OBDII code P0445 for an Audi indicates a problem with the EVAP (Evaporative Emission Control) System Purge Control Valve Circuit being shorted.
2. What are common symptoms of a P0445 code in an Audi?
Common symptoms of a P0445 code in an Audi may include a check engine light illuminated on the dashboard, poor fuel efficiency, and potential issues with the vehicle's emissions system.
3. What are possible causes of a P0445 code in an Audi?
Possible causes of a P0445 code in an Audi include a faulty EVAP purge control valve, damaged wiring or connectors in the circuit, a shorted control valve circuit, or a malfunctioning PCM (Powertrain Control Module).
4. How can I diagnose a P0445 code in my Audi?
Diagnosing a P0445 code in your Audi involves using an OBDII scanner to retrieve the trouble code, inspecting the EVAP purge control valve and its circuit for any visible damage, testing the valve's resistance, and checking the wiring and connectors for continuity.
5. Can I drive my Audi with a P0445 code?
It is generally safe to drive your Audi with a P0445 code, but it is recommended to have the issue diagnosed and repaired as soon as possible to prevent potential damage to the vehicle's emissions system and to ensure optimal performance.
6. How do I repair a P0445 code in my Audi?
To repair a P0445 code in your Audi, you may need to replace the EVAP purge control valve, repair or replace damaged wiring or connectors in the circuit, clear the trouble code with an OBDII scanner, and test the system to ensure the issue has been resolved.
7. Can I reset the P0445 code in my Audi without fixing the problem?
While you can clear the P0445 trouble code with an OBDII scanner without fixing the underlying issue, it is not recommended as the code is likely to reappear if the problem is not addressed, potentially causing further damage to the vehicle.
8. How much does it cost to fix a P0445 code in an Audi?
The cost to fix a P0445 code in an Audi can vary depending on the specific cause of the issue, the labor rates of the repair shop, and the cost of any replacement parts needed. It is recommended to get a diagnostic and repair estimate from a qualified mechanic.
9. What happens if I ignore a P0445 code in my Audi?
Ignoring a P0445 code in your Audi can lead to decreased fuel efficiency, potential damage to the vehicle's emissions system, and may result in the vehicle failing an emissions test. It is best to address the issue promptly to prevent further complications.
10. How can I prevent a P0445 code from appearing in my Audi?
To prevent a P0445 code from appearing in your Audi, it is important to perform regular maintenance on the vehicle, such as checking and replacing the EVAP purge control valve as recommended by the manufacturer, inspecting the wiring and connectors for damage, and keeping the emissions system in good working condition.
Discuss the causes and fixes for P0445 Audi OBDII Code
Code P0445 Audi comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
