P0445 2013 Nissan Rogue Code - EVAP Canister Purge Volume Control Solenoid Valve Circuit Shorted
Quick Answer
The Evaporative Emission System (EVAP) Canister Purge Volume Control Solenoid Valve controls flow rate of fuel vapor from the EVAP canister. Common causes include Faulty Evaporative Emission (EVAP) Purge Solenoid Control, Evaporative Emission (EVAP) Purge Solenoid Control harness is open or shorted, Evaporative Emission (EVAP) Purge Solenoid Control circuit poor electrical connection. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
- What it means
- P0445 2013 Nissan Rogue indicates EVAP Canister Purge Volume Control Solenoid Valve Circuit Shorted.
- Common causes
- Common causes include Faulty Evaporative Emission (EVAP) Purge Solenoid Control, Evaporative Emission (EVAP) Purge Solenoid Control harness is open or shorted, Evaporative Emission (EVAP) Purge Solenoid Control circuit poor electrical connection.
- Severity
- Low - monitor the vehicle and repair when practical.
- Can I drive?
- The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
Code P0445 2013 Nissan Rogue Description
The EVAP canister purge volume control solenoid valve uses a ON/OFF duty to control the flow rate of fuel vapor from the EVAP canister. The EVAP canister purge volume control solenoid valve is moved by ON/OFF pulses from the ECM. The longer the ON pulse, the greater the amount of fuel vapor that will flow through the valve.
What are the Possible Causes of the DTC P0445 2013 Nissan Rogue?
- Faulty Evaporative Emission (EVAP) Purge Solenoid Control
- Evaporative Emission (EVAP) Purge Solenoid Control harness is open or shorted
- Evaporative Emission (EVAP) Purge Solenoid Control circuit poor electrical connection
How to Fix the DTC P0445 2013 Nissan Rogue?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0445 2013 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0445 2013 Nissan Rogue code?
Need more information on how to fix the P0445 2013 Nissan Rogue code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0445 2013 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0445 2013 Nissan Rogue Code
1. What are the common symptoms of OBDII code P0445 in a 2013 Nissan Rogue?
The common symptoms of code P0445 in a 2013 Nissan Rogue include rough idling, decreased fuel efficiency, and the illumination of the check engine light.
2. What does the OBDII code P0445 indicate in a 2013 Nissan Rogue?
Code P0445 in a 2013 Nissan Rogue indicates a problem with the EVAP Canister Purge Volume Control Solenoid Valve Circuit being shorted.
3. What are the possible causes of OBDII code P0445 in a 2013 Nissan Rogue?
The possible causes of code P0445 in a 2013 Nissan Rogue include a faulty purge volume control solenoid valve, damaged wiring or connectors in the circuit, or a short circuit in the system.
4. How can I diagnose the EVAP Canister Purge Volume Control Solenoid Valve Circuit in a 2013 Nissan Rogue?
To diagnose the EVAP Canister Purge Volume Control Solenoid Valve Circuit in a 2013 Nissan Rogue, you can use an OBDII scanner to read the trouble codes, visually inspect the wiring and connectors, and test the solenoid valve for proper functionality.
5. Can I drive my 2013 Nissan Rogue with OBDII code P0445?
While it may be possible to drive your 2013 Nissan Rogue with code P0445, it is recommended to address the issue promptly to prevent further damage to the EVAP system and ensure optimal vehicle performance.
6. How do I repair OBDII code P0445 in a 2013 Nissan Rogue?
To repair code P0445 in a 2013 Nissan Rogue, you may need to replace the EVAP Canister Purge Volume Control Solenoid Valve, repair any damaged wiring or connectors, and clear the trouble codes with an OBDII scanner.
7. Is it necessary to reset the check engine light after fixing OBDII code P0445 in a 2013 Nissan Rogue?
Yes, it is important to reset the check engine light using an OBDII scanner after fixing code P0445 in a 2013 Nissan Rogue to ensure the issue has been resolved and to monitor for any new problems.
8. Can a DIY enthusiast fix OBDII code P0445 in a 2013 Nissan Rogue?
Depending on the level of mechanical expertise, a DIY enthusiast may be able to fix code P0445 in a 2013 Nissan Rogue by following repair guides, consulting the vehicle's manual, and using the necessary tools.
9. How much does it cost to repair OBDII code P0445 in a 2013 Nissan Rogue?
The cost to repair code P0445 in a 2013 Nissan Rogue can vary depending on the cause of the issue, the cost of parts and labor, and whether the repair is done at a dealership or an independent mechanic. It is advisable to obtain quotes from different sources.
10. Can OBDII code P0445 in a 2013 Nissan Rogue cause emissions test failure?
Yes, code P0445 in a 2013 Nissan Rogue can cause emissions test failure as it indicates a problem with the EVAP system, which is crucial for controlling vehicle emissions. It is recommended to address the issue before undergoing an emissions test.
Discuss the causes and fixes for P0445 2013 Nissan Rogue OBDII Code
Code P0445 2013 Nissan Rogue comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
