P0445 2012 Nissan Rogue Code - EVAP Canister Purge Volume Control Solenoid Valve Circuit Shorted
Quick Answer
The Evaporative Emission System (EVAP) Canister Purge Volume Control Solenoid Valve controls flow rate of fuel vapor from the EVAP canister. Common causes include Faulty Evaporative Emission (EVAP) Purge Solenoid Control, Evaporative Emission (EVAP) Purge Solenoid Control harness is open or shorted, Evaporative Emission (EVAP) Purge Solenoid Control circuit poor electrical connection. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
- What it means
- P0445 2012 Nissan Rogue indicates EVAP Canister Purge Volume Control Solenoid Valve Circuit Shorted.
- Common causes
- Common causes include Faulty Evaporative Emission (EVAP) Purge Solenoid Control, Evaporative Emission (EVAP) Purge Solenoid Control harness is open or shorted, Evaporative Emission (EVAP) Purge Solenoid Control circuit poor electrical connection.
- Severity
- Low - monitor the vehicle and repair when practical.
- Can I drive?
- The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
Code P0445 2012 Nissan Rogue Description
The EVAP canister purge volume control solenoid valve uses a ON/OFF duty to control the flow rate of fuel vapor from the EVAP canister. The EVAP canister purge volume control solenoid valve is moved by ON/OFF pulses from the ECM. The longer the ON pulse, the greater the amount of fuel vapor that will flow through the valve.
What are the Possible Causes of the DTC P0445 2012 Nissan Rogue?
- Faulty Evaporative Emission (EVAP) Purge Solenoid Control
- Evaporative Emission (EVAP) Purge Solenoid Control harness is open or shorted
- Evaporative Emission (EVAP) Purge Solenoid Control circuit poor electrical connection
How to Fix the DTC P0445 2012 Nissan Rogue?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0445 2012 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0445 2012 Nissan Rogue code?
Need more information on how to fix the P0445 2012 Nissan Rogue code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0445 2012 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0445 2012 Nissan Rogue Code
1. What are the common symptoms of OBDII code P0445 in a 2012 Nissan Rogue?
The common symptoms of code P0445 in a 2012 Nissan Rogue include rough idling, poor fuel efficiency, and the illumination of the Check Engine Light.
2. What does the OBDII code P0445 in a 2012 Nissan Rogue indicate?
Code P0445 in a 2012 Nissan Rogue indicates a malfunction in the EVAP canister purge volume control solenoid valve circuit, specifically a short circuit.
3. What are the possible causes of OBDII code P0445 in a 2012 Nissan Rogue?
Common causes of code P0445 in a 2012 Nissan Rogue include a faulty EVAP canister purge volume control solenoid valve, damaged wiring or connectors in the circuit, or a shorted solenoid valve.
4. How serious is OBDII code P0445 in a 2012 Nissan Rogue?
While code P0445 may not cause immediate drivability issues, it can affect the vehicle's emissions control system and fuel efficiency. It is recommended to address this code promptly to prevent further complications.
5. Can I continue driving my 2012 Nissan Rogue with OBDII code P0445?
It is generally safe to drive your 2012 Nissan Rogue with code P0445, but it is advisable to have the issue diagnosed and repaired as soon as possible to avoid potential damage to the emissions control system.
6. How can I diagnose OBDII code P0445 in my 2012 Nissan Rogue?
Diagnosing code P0445 involves using an OBDII scanner to retrieve the specific fault code and then inspecting the EVAP canister purge volume control solenoid valve, wiring, and connectors for any visible damage or issues.
7. What are some repair tips for fixing OBDII code P0445 in a 2012 Nissan Rogue?
Repairing code P0445 may involve replacing the faulty EVAP canister purge volume control solenoid valve, repairing damaged wiring or connectors, and clearing the fault code with an OBDII scanner.
8. Can I reset the Check Engine Light caused by OBDII code P0445 in my 2012 Nissan Rogue?
After addressing the underlying issue that triggered code P0445, you can reset the Check Engine Light using an OBDII scanner. If the problem persists, the light may come back on.
9. How much does it cost to repair OBDII code P0445 in a 2012 Nissan Rogue?
The cost of repairing code P0445 in a 2012 Nissan Rogue can vary depending on the labor rates, parts needed for replacement, and any additional diagnostics required. It is recommended to consult a professional mechanic for an accurate estimate.
10. Is it possible to prevent OBDII code P0445 from appearing in my 2012 Nissan Rogue?
While some instances of code P0445 may be unavoidable due to component failure, regular maintenance and inspections of the EVAP system can help prevent issues that trigger this fault code.
Discuss the causes and fixes for P0445 2012 Nissan Rogue OBDII Code
Code P0445 2012 Nissan Rogue comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
