P0444 2013 Nissan Rogue Code - EVAP Canister Purge Volume Control Solenoid Valve Circuit Open
Quick Answer
This system controls flow rate of fuel vapor from the Evaporative Emission System (EVAP) canister. Common causes include Faulty Evaporative Emission (EVAP) Purge Solenoid Control, Evaporative Emission (EVAP) Purge Solenoid Control harness is open or shorted, Evaporative Emission (EVAP) Purge Solenoid Control circuit poor electrical connection. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
- What it means
- P0444 2013 Nissan Rogue indicates EVAP Canister Purge Volume Control Solenoid Valve Circuit Open.
- Common causes
- Common causes include Faulty Evaporative Emission (EVAP) Purge Solenoid Control, Evaporative Emission (EVAP) Purge Solenoid Control harness is open or shorted, Evaporative Emission (EVAP) Purge Solenoid Control circuit poor electrical connection.
- Severity
- Low - monitor the vehicle and repair when practical.
- Can I drive?
- The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
Code P0444 2013 Nissan Rogue Description
The EVAP canister purge volume control solenoid valve uses a ON/OFF duty to control the flow rate of fuel vapor from the EVAP canister. The EVAP canister purge volume control solenoid valve is moved by ON/OFF pulses from the ECM. The longer the ON pulse, the greater the amount of fuel vapor that will flow through the valve.
What are the Possible Causes of the DTC P0444 2013 Nissan Rogue?
- Faulty Evaporative Emission (EVAP) Purge Solenoid Control
- Evaporative Emission (EVAP) Purge Solenoid Control harness is open or shorted
- Evaporative Emission (EVAP) Purge Solenoid Control circuit poor electrical connection
How to Fix the DTC P0444 2013 Nissan Rogue?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0444 2013 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0444 2013 Nissan Rogue code?
Need more information on how to fix the P0444 2013 Nissan Rogue code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0444 2013 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0444 2013 Nissan Rogue Code
1. What does the OBDII code P0444 on a 2013 Nissan Rogue indicate?
The code P0444 for a 2013 Nissan Rogue specifically points to a fault in the EVAP Canister Purge Volume Control Solenoid Valve Circuit, indicating an open circuit issue.
2. What are the common symptoms of a P0444 code on a 2013 Nissan Rogue?
Common symptoms of a P0444 code in a 2013 Nissan Rogue may include rough idling, decreased fuel efficiency, and an illuminated check engine light on the dashboard.
3. What are the potential causes of a P0444 code on a 2013 Nissan Rogue?
Possible causes of a P0444 code on a 2013 Nissan Rogue include a faulty EVAP canister purge volume control solenoid valve, damaged wiring or connectors in the circuit, or a malfunctioning PCM (Powertrain Control Module).
4. How can I diagnose a P0444 code on my 2013 Nissan Rogue?
Diagnosing a P0444 code on a 2013 Nissan Rogue involves checking the EVAP canister purge volume control solenoid valve for proper operation, inspecting the wiring and connectors for damage, and using a diagnostic scan tool to read the code and clear it for testing.
5. Can I continue driving my 2013 Nissan Rogue with a P0444 code?
While it may be possible to drive the vehicle with a P0444 code, it is recommended to address the issue promptly to prevent potential damage to other components and ensure optimal performance and fuel efficiency.
6. How can I repair a P0444 code on a 2013 Nissan Rogue?
Repairing a P0444 code on a 2013 Nissan Rogue typically involves replacing the faulty EVAP canister purge volume control solenoid valve, repairing any damaged wiring or connectors, and clearing the code with a diagnostic scan tool.
7. Is it possible to reset the P0444 code on a 2013 Nissan Rogue without fixing the issue?
Resetting the P0444 code without addressing the underlying problem may temporarily turn off the check engine light, but the code is likely to return if the root cause, such as a faulty solenoid valve, is not repaired.
8. How much does it cost to fix a P0444 code on a 2013 Nissan Rogue?
The cost of fixing a P0444 code on a 2013 Nissan Rogue can vary depending on the cause of the issue, but it may involve part replacement, labor costs, and potential diagnostic fees from a mechanic or dealership.
9. Are there any DIY repair tips for a P0444 code on a 2013 Nissan Rogue?
If you have the necessary tools and automotive experience, you may be able to replace the EVAP canister purge volume control solenoid valve yourself by following a repair manual or online tutorials specific to the 2013 Nissan Rogue.
10. How can I prevent a P0444 code from recurring on my 2013 Nissan Rogue?
To help prevent a P0444 code from coming back on your 2013 Nissan Rogue, it's essential to perform regular maintenance checks, address any fuel system issues promptly, and ensure all components related to the EVAP system are in good condition.
Discuss the causes and fixes for P0444 2013 Nissan Rogue OBDII Code
Code P0444 2013 Nissan Rogue comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
