AutoCodes – Nissan – P0444 2012 Nissan Rogue

P0444 2012 Nissan Rogue Code - EVAP Canister Purge Volume Control Solenoid Valve Circuit Open

Quick Answer

This system controls flow rate of fuel vapor from the Evaporative Emission System (EVAP) canister. Common causes include Faulty Evaporative Emission (EVAP) Purge Solenoid Control, Evaporative Emission (EVAP) Purge Solenoid Control harness is open or shorted, Evaporative Emission (EVAP) Purge Solenoid Control circuit poor electrical connection. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

What it means: P0444 2012 Nissan Rogue indicates EVAP Canister Purge Volume Control Solenoid Valve Circuit Open.
Common causes: Common causes include Faulty Evaporative Emission (EVAP) Purge Solenoid Control, Evaporative Emission (EVAP) Purge Solenoid Control harness is open or shorted, Evaporative Emission (EVAP) Purge Solenoid Control circuit poor electrical connection.
Severity: Low - monitor the vehicle and repair when practical.
Can I drive?: The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 4,881

How popular is this code, among other codes? Low

Repair Importance Level

Low (Monitor) (1 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Sep 15, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0444 2012 Nissan Rogue Description

This system controls flow rate of fuel vapor from the Evaporative Emission System (EVAP) canister. The opening of the vapor by-pass passage in the EVAP canister purge volume control solenoid valve changes to control the flow rate. The EVAP canister purge volume control solenoid valve repeats ON/OFF operation according to the signal sent from the Engine Control Module (ECM). The opening of the valve varies for optimum engine control. The optimum value stored in the ECM is determined by considering various engine conditions. When the engine is operating, the flow rate of fuel vapor from the EVAP canister is regulated as the air flow changes.
The EVAP canister purge volume control solenoid valve uses a ON/OFF duty to control the flow rate of fuel vapor from the EVAP canister. The EVAP canister purge volume control solenoid valve is moved by ON/OFF pulses from the ECM. The longer the ON pulse, the greater the amount of fuel vapor that will flow through the valve.

OBDII Code P0444 2012 Nissan Rogue - EVAP Canister Purge Volume Control Solenoid Valve Circuit Open - AutoCodes.com — P0444 2012 Nissan Rogue Code - EVAP Canister Purge Volume Control Solenoid Valve Circuit Open

What does this mean?

What are the Possible Causes of the DTC P0444 2012 Nissan Rogue?

Faulty Evaporative Emission (EVAP) Purge Solenoid Control
Evaporative Emission (EVAP) Purge Solenoid Control harness is open or shorted
Evaporative Emission (EVAP) Purge Solenoid Control circuit poor electrical connection

How to Fix the DTC P0444 2012 Nissan Rogue?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0444 2012 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0444 2012 Nissan Rogue code?

Need more information on how to fix the P0444 2012 Nissan Rogue code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0444 2012 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0444 2012 Nissan Rogue Code

1. What does OBDII code P0444 on a 2012 Nissan Rogue indicate?

The code P0444 in a 2012 Nissan Rogue relates to the EVAP (Evaporative Emission Control System) Canister Purge Volume Control Solenoid Valve Circuit Open.

2. What are the common symptoms of a P0444 code in a 2012 Nissan Rogue?

Common symptoms of a P0444 code may include rough idling, poor fuel economy, a noticeable fuel odor, and the illumination of the check engine light on the dashboard.

3. What are the possible causes of the EVAP Canister Purge Volume Control Solenoid Valve Circuit Open code on a 2012 Nissan Rogue?

Potential causes of the P0444 code in a 2012 Nissan Rogue include a faulty purge control valve, damaged wiring or connectors in the purge valve circuit, or a malfunctioning ECM (Engine Control Module).

4. How can I diagnose the issue causing the P0444 code on my 2012 Nissan Rogue?

To diagnose the problem, you can start by visually inspecting the wiring and connectors in the purge valve circuit. You may also need to test the purge valve itself and check for any signs of damage or malfunction.

5. Can I continue driving my 2012 Nissan Rogue with a P0444 code?

It is generally not recommended to continue driving your Nissan Rogue with a P0444 code as it can lead to further damage to the vehicle's emission control system and potentially affect its performance.

6. How can I repair the EVAP Canister Purge Volume Control Solenoid Valve Circuit Open issue in my 2012 Nissan Rogue?

Repairing the P0444 code may involve replacing the faulty purge control valve, repairing or replacing damaged wiring or connectors, or resetting the ECM. It is advisable to consult a professional mechanic for a proper diagnosis and repair.

7. Are there any DIY tips for fixing the P0444 code in a 2012 Nissan Rogue?

While some basic troubleshooting like checking for loose connections or damaged wires can be done by DIY enthusiasts, complex repairs involving component replacements or ECM reprogramming are best left to experienced mechanics.

8. How much does it cost to fix the P0444 code in a 2012 Nissan Rogue?

The cost of fixing a P0444 code on a 2012 Nissan Rogue can vary depending on the root cause of the issue, the cost of parts needed for repair, and labor charges from the mechanic. It's recommended to get multiple quotes from repair shops.

9. Will resetting the check engine light resolve the P0444 code in my 2012 Nissan Rogue?

Simply resetting the check engine light may temporarily clear the code, but it will not fix the underlying issue causing the P0444 code. It's crucial to diagnose and repair the problem to prevent further complications.

10. How often does the EVAP Canister Purge Volume Control Solenoid Valve Circuit Open code occur in 2012 Nissan Rogues?

The occurrence of the P0444 code in 2012 Nissan Rogues can vary, but it is a relatively common issue related to the vehicle's emission control system. Regular maintenance and prompt attention to any warning lights can help prevent such problems.