P0444 2011 Nissan Rogue Code - EVAP Canister Purge Volume Control Solenoid Valve Circuit Open
Quick Answer
This system controls flow rate of fuel vapor from the Evaporative Emission System (EVAP) canister. Common causes include Faulty Evaporative Emission (EVAP) Purge Solenoid Control, Evaporative Emission (EVAP) Purge Solenoid Control harness is open or shorted, Evaporative Emission (EVAP) Purge Solenoid Control circuit poor electrical connection. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
- What it means
- P0444 2011 Nissan Rogue indicates EVAP Canister Purge Volume Control Solenoid Valve Circuit Open.
- Common causes
- Common causes include Faulty Evaporative Emission (EVAP) Purge Solenoid Control, Evaporative Emission (EVAP) Purge Solenoid Control harness is open or shorted, Evaporative Emission (EVAP) Purge Solenoid Control circuit poor electrical connection.
- Severity
- Low - monitor the vehicle and repair when practical.
- Can I drive?
- The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
Code P0444 2011 Nissan Rogue Description
The EVAP canister purge volume control solenoid valve uses a ON/OFF duty to control the flow rate of fuel vapor from the EVAP canister. The EVAP canister purge volume control solenoid valve is moved by ON/OFF pulses from the ECM. The longer the ON pulse, the greater the amount of fuel vapor that will flow through the valve.
What are the Possible Causes of the DTC P0444 2011 Nissan Rogue?
- Faulty Evaporative Emission (EVAP) Purge Solenoid Control
- Evaporative Emission (EVAP) Purge Solenoid Control harness is open or shorted
- Evaporative Emission (EVAP) Purge Solenoid Control circuit poor electrical connection
How to Fix the DTC P0444 2011 Nissan Rogue?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0444 2011 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0444 2011 Nissan Rogue code?
Need more information on how to fix the P0444 2011 Nissan Rogue code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0444 2011 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0444 2011 Nissan Rogue Code
1. What are common symptoms of OBDII code P0444 in a 2011 Nissan Rogue?
- Common symptoms include the check engine light turning on, rough idling, difficulty starting the vehicle, and decreased fuel efficiency.
2. What does the OBDII code P0444 on a 2011 Nissan Rogue indicate?
- OBDII code P0444 indicates a fault in the EVAP Canister Purge Volume Control Solenoid Valve Circuit, specifically signaling an open circuit.
3. What are possible causes of the EVAP Canister Purge Volume Control Solenoid Valve Circuit Open error in a 2011 Nissan Rogue?
- Possible causes include a faulty purge volume control solenoid valve, damaged wiring or connectors in the circuit, a blown fuse, or a malfunctioning PCM.
4. How can I diagnose the EVAP Canister Purge Volume Control Solenoid Valve Circuit Open issue in my 2011 Nissan Rogue?
- Diagnose by visually inspecting wiring and connectors, testing the solenoid valve for proper operation, checking fuse integrity, and using an OBDII scanner to read the code and monitor system parameters.
5. Can I drive my 2011 Nissan Rogue with OBDII code P0444 present?
- It is generally safe to drive with code P0444, but it's recommended to address the issue promptly to prevent potential damage to other emission control components.
6. How can I repair the EVAP Canister Purge Volume Control Solenoid Valve Circuit Open problem in my 2011 Nissan Rogue?
- Repair options include replacing the faulty purge volume control solenoid valve, repairing or replacing damaged wiring/connectors, checking and replacing fuses, and resetting the trouble code.
7. Will resetting the OBDII code P0444 on my 2011 Nissan Rogue make it go away permanently?
- Resetting the code may clear the check engine light temporarily, but if the underlying issue causing the code is not addressed, the code is likely to reappear.
8. Can a DIY enthusiast fix the EVAP Canister Purge Volume Control Solenoid Valve Circuit Open issue in a 2011 Nissan Rogue?
- Depending on the individual's skill level, DIY enthusiasts can troubleshoot and potentially repair this issue themselves by following the vehicle's service manual and using appropriate tools.
9. Is the EVAP Canister Purge Volume Control Solenoid Valve Circuit Open problem in a 2011 Nissan Rogue a common issue?
- While not extremely common, issues with the EVAP system, including code P0444, can occur in vehicles due to various factors such as age, wear, and environmental conditions.
10. How much does it typically cost to repair OBDII code P0444 in a 2011 Nissan Rogue at a professional auto repair shop?
- The cost to repair code P0444 can vary depending on the exact cause of the issue, but it may range from $100 to $300 or more, including parts and labor.
Discuss the causes and fixes for P0444 2011 Nissan Rogue OBDII Code
Code P0444 2011 Nissan Rogue comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
