AutoCodes – Nissan – P0444 2010 Nissan Rogue

P0444 2010 Nissan Rogue Code - EVAP Canister Purge Volume Control Solenoid Valve Circuit Open

Quick Answer

This system controls flow rate of fuel vapor from the Evaporative Emission System (EVAP) canister. Common causes include Faulty Evaporative Emission (EVAP) Purge Solenoid Control, Evaporative Emission (EVAP) Purge Solenoid Control harness is open or shorted, Evaporative Emission (EVAP) Purge Solenoid Control circuit poor electrical connection. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

What it means: P0444 2010 Nissan Rogue indicates EVAP Canister Purge Volume Control Solenoid Valve Circuit Open.
Common causes: Common causes include Faulty Evaporative Emission (EVAP) Purge Solenoid Control, Evaporative Emission (EVAP) Purge Solenoid Control harness is open or shorted, Evaporative Emission (EVAP) Purge Solenoid Control circuit poor electrical connection.
Severity: Low - monitor the vehicle and repair when practical.
Can I drive?: The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 4,140

How popular is this code, among other codes? Low

Repair Importance Level

Low (Monitor) (1 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 23, 2020

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0444 2010 Nissan Rogue Description

This system controls flow rate of fuel vapor from the Evaporative Emission System (EVAP) canister. The opening of the vapor by-pass passage in the EVAP canister purge volume control solenoid valve changes to control the flow rate. The EVAP canister purge volume control solenoid valve repeats ON/OFF operation according to the signal sent from the Engine Control Module (ECM). The opening of the valve varies for optimum engine control. The optimum value stored in the ECM is determined by considering various engine conditions. When the engine is operating, the flow rate of fuel vapor from the EVAP canister is regulated as the air flow changes.
The EVAP canister purge volume control solenoid valve uses a ON/OFF duty to control the flow rate of fuel vapor from the EVAP canister. The EVAP canister purge volume control solenoid valve is moved by ON/OFF pulses from the ECM. The longer the ON pulse, the greater the amount of fuel vapor that will flow through the valve.

OBDII Code P0444 2010 Nissan Rogue - EVAP Canister Purge Volume Control Solenoid Valve Circuit Open - AutoCodes.com — P0444 2010 Nissan Rogue Code - EVAP Canister Purge Volume Control Solenoid Valve Circuit Open

What does this mean?

What are the Possible Causes of the DTC P0444 2010 Nissan Rogue?

Faulty Evaporative Emission (EVAP) Purge Solenoid Control
Evaporative Emission (EVAP) Purge Solenoid Control harness is open or shorted
Evaporative Emission (EVAP) Purge Solenoid Control circuit poor electrical connection

How to Fix the DTC P0444 2010 Nissan Rogue?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

There is a factory service bulletin for the 2010 Nissan Rogue:
2010 Nissan Rogue Service Bulletin OBDII Code P0444

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0444 2010 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0444 2010 Nissan Rogue code?

Need more information on how to fix the P0444 2010 Nissan Rogue code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0444 2010 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0444 2010 Nissan Rogue Code

1. What does the OBDII code P0444 for a 2010 Nissan Rogue indicate?

The code P0444 on a 2010 Nissan Rogue refers to a problem with the EVAP Canister Purge Volume Control Solenoid Valve Circuit being open.

2. What are the common symptoms of a P0444 fault in a 2010 Nissan Rogue?

Common symptoms of a P0444 fault in a 2010 Nissan Rogue may include the check engine light coming on, rough idling, decreased fuel efficiency, and potential difficulty starting the vehicle.

3. What are the possible causes of the P0444 code in a 2010 Nissan Rogue?

Possible causes of the P0444 code in a 2010 Nissan Rogue include a faulty EVAP Canister Purge Volume Control Solenoid Valve, damaged wiring or connectors in the circuit, or a malfunctioning ECM (Engine Control Module).

4. How can I diagnose a P0444 error code in my 2010 Nissan Rogue?

To diagnose a P0444 error code in your 2010 Nissan Rogue, you can use an OBDII scanner to read the code, visually inspect the wiring and connectors for any damage, and test the EVAP Canister Purge Volume Control Solenoid Valve for proper functioning.

5. Can I continue driving my 2010 Nissan Rogue with a P0444 fault?

It is not recommended to continue driving your 2010 Nissan Rogue with a P0444 fault as it can lead to potential emissions issues and affect the overall performance of the vehicle.

6. How can I repair a P0444 code on my 2010 Nissan Rogue?

To repair a P0444 code on your 2010 Nissan Rogue, you may need to replace the EVAP Canister Purge Volume Control Solenoid Valve, repair any damaged wiring or connectors, or seek assistance from a professional mechanic for further diagnosis and repair.

7. Are there any DIY tips for fixing a P0444 fault in a 2010 Nissan Rogue?

While some basic checks like inspecting wiring and connectors can be done DIY, it's recommended to consult a professional for accurate diagnosis and repair of a P0444 fault in a 2010 Nissan Rogue.

8. How much does it cost to fix a P0444 error in a 2010 Nissan Rogue?

The cost to fix a P0444 error in a 2010 Nissan Rogue can vary depending on the specific issue causing the code, parts needed for repair, and labor costs. It's advisable to get a few quotes from mechanics for an accurate estimate.

9. Can a P0444 code in a 2010 Nissan Rogue cause any long-term damage to the vehicle?

Ignoring a P0444 code in a 2010 Nissan Rogue may lead to increased emissions, potential damage to the catalytic converter, and overall reduced performance. It's best to address the issue promptly to prevent any long-term damage.

10. Is the P0444 code a common issue in 2010 Nissan Rogues?

While the P0444 code related to the EVAP system can occur in various vehicles, including the 2010 Nissan Rogue, it may not be as common as some other OBDII trouble codes.