P0444 2008 NISSAN SENTRA - EVAP Canister Purge Volume Control Solenoid Valve Circuit Open
- Faulty Evaporative Emission (EVAP) Purge Solenoid Control
- Evaporative Emission (EVAP) Purge Solenoid Control harness is open or shorted
- Evaporative Emission (EVAP) Purge Solenoid Control circuit poor electrical connection
When is the code detected?An excessively low voltage signal is sent to ECM through the valve
- Engine Light ON (or Service Engine Soon Warning Light)
P0444 2008 Nissan Sentra DescriptionThis system controls flow rate of fuel vapor from the Evaporative Emission System (EVAP) canister. The opening of the vapor by-pass passage in the EVAP canister purge volume control solenoid valve changes to control the flow rate. The EVAP canister purge volume control solenoid valve repeats ON/OFF operation according to the signal sent from the Engine Control Module (ECM). The opening of the valve varies for optimum engine control. The optimum value stored in the ECM is determined by considering various engine conditions. When the engine is operating, the flow rate of fuel vapor from the EVAP canister is regulated as the air flow changes.
The EVAP canister purge volume control solenoid valve uses a ON/OFF duty to control the flow rate of fuel vapor from the EVAP canister. The EVAP canister purge volume control solenoid valve is moved by ON/OFF pulses from the ECM. The longer the ON pulse, the greater the amount of fuel vapor that will flow through the valve.
Need more help?Get the P0444 2008 Nissan Sentra code diagnosed by a professional: Find a repair shop in your area
P0444 2008 NISSAN SENTRA CommentsHelp us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the P0444 2008 Nissan Sentra code? Have you replaced any parts?
Any information is appreciated. Thanks