P0444 2008 Nissan Rogue Code - EVAP Canister Purge Volume Control Solenoid Valve Circuit Open
Quick Answer
This system controls flow rate of fuel vapor from the Evaporative Emission System (EVAP) canister. Common causes include Faulty Evaporative Emission (EVAP) Purge Solenoid Control, Evaporative Emission (EVAP) Purge Solenoid Control harness is open or shorted, Evaporative Emission (EVAP) Purge Solenoid Control circuit poor electrical connection. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
- What it means
- P0444 2008 Nissan Rogue indicates EVAP Canister Purge Volume Control Solenoid Valve Circuit Open.
- Common causes
- Common causes include Faulty Evaporative Emission (EVAP) Purge Solenoid Control, Evaporative Emission (EVAP) Purge Solenoid Control harness is open or shorted, Evaporative Emission (EVAP) Purge Solenoid Control circuit poor electrical connection.
- Severity
- Low - monitor the vehicle and repair when practical.
- Can I drive?
- The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
Code P0444 2008 Nissan Rogue Description
The EVAP canister purge volume control solenoid valve uses a ON/OFF duty to control the flow rate of fuel vapor from the EVAP canister. The EVAP canister purge volume control solenoid valve is moved by ON/OFF pulses from the ECM. The longer the ON pulse, the greater the amount of fuel vapor that will flow through the valve.
What are the Possible Causes of the DTC P0444 2008 Nissan Rogue?
- Faulty Evaporative Emission (EVAP) Purge Solenoid Control
- Evaporative Emission (EVAP) Purge Solenoid Control harness is open or shorted
- Evaporative Emission (EVAP) Purge Solenoid Control circuit poor electrical connection
How to Fix the DTC P0444 2008 Nissan Rogue?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
2008 Nissan Rogue Service Bulletin OBDII Code P0444
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0444 2008 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0444 2008 Nissan Rogue code?
Need more information on how to fix the P0444 2008 Nissan Rogue code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0444 2008 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0444 2008 Nissan Rogue Code
1. What does the OBDII code P0444 on a 2008 Nissan Rogue indicate?
- The code P0444 indicates a problem with the EVAP canister purge volume control solenoid valve circuit being open.
2. What are the common symptoms of a P0444 code in a 2008 Nissan Rogue?
- Common symptoms include the check engine light illuminating on the dashboard and potential issues with the vehicle's emissions system.
3. What are the possible causes of a P0444 code in a 2008 Nissan Rogue?
- The code can be triggered by a faulty EVAP canister purge volume control solenoid valve, damaged wiring or connectors, or a problem with the vehicle's ECM.
4. How can I diagnose the cause of the P0444 code in my 2008 Nissan Rogue?
- To diagnose the issue, you can perform a visual inspection of the solenoid valve and its wiring, use a multimeter to check for continuity, and conduct a smoke test to detect leaks in the EVAP system.
5. What are the repair options for a P0444 code in a 2008 Nissan Rogue?
- Repair options include replacing the EVAP canister purge volume control solenoid valve, repairing or replacing damaged wiring or connectors, and resetting the ECM after fixing the issue.
6. Can I drive my 2008 Nissan Rogue with a P0444 code?
- It is generally safe to drive the vehicle with a P0444 code, but it is recommended to address the issue promptly to prevent potential damage to the emissions system.
7. How much does it typically cost to repair a P0444 code on a 2008 Nissan Rogue?
- The cost of repairs can vary depending on the exact cause of the issue, but it may range from $100 to $300 for parts and labor.
8. Will resetting the check engine light make the P0444 code disappear?
- Resetting the check engine light may temporarily clear the code, but if the underlying issue is not addressed, the code is likely to reappear after driving the vehicle.
9. Can a P0444 code in a 2008 Nissan Rogue cause any long-term damage if left unrepaired?
- While driving with a P0444 code may not cause immediate harm to the vehicle, it can lead to increased emissions, reduced fuel efficiency, and potential problems with passing emissions tests.
10. How often does a P0444 code occur in a 2008 Nissan Rogue, and is it a common issue?
- The P0444 code can occur occasionally in vehicles with an EVAP system, including the 2008 Nissan Rogue, but it is not considered a very common issue compared to other OBDII codes.
Discuss the causes and fixes for P0444 2008 Nissan Rogue OBDII Code
Code P0444 2008 Nissan Rogue comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
