P0443 2009 Ford Fusion Code - EVAP Purge Control Circuit
Quick Answer
The Powertrain Control Module (PCM) monitors the state of the evaporative emission (EVAP) canister purge valve circuit output driver. Common causes include Faulty Evaporative Emission (EVAP) Purge Solenoid Control, Evaporative Emission (EVAP) Purge Solenoid Control harness is open or shorted, Evaporative Emission (EVAP) Purge Solenoid Control circuit poor electrical connection. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
- What it means
- P0443 2009 Ford Fusion indicates EVAP Purge Control Circuit .
- Common causes
- Common causes include Faulty Evaporative Emission (EVAP) Purge Solenoid Control, Evaporative Emission (EVAP) Purge Solenoid Control harness is open or shorted, Evaporative Emission (EVAP) Purge Solenoid Control circuit poor electrical connection.
- Severity
- Low - monitor the vehicle and repair when practical.
- Can I drive?
- The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
Code P0443 2009 Ford Fusion Description
What are the Possible Causes of the DTC P0443 2009 Ford Fusion?
- Faulty Evaporative Emission (EVAP) Purge Solenoid Control
- Evaporative Emission (EVAP) Purge Solenoid Control harness is open or shorted
- Evaporative Emission (EVAP) Purge Solenoid Control circuit poor electrical connection
- Damaged PCM
How to Fix the DTC P0443 2009 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0443 2009 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0443 2009 Ford Fusion code?
Need more information on how to fix the P0443 2009 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0443 2009 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0443 2009 Ford Fusion Code
1. What does the OBDII code P0443 mean on a 2009 Ford Fusion?
P0443 indicates a malfunction in the EVAP Purge Control Valve Circuit, which is part of the vehicle's evaporative emissions system.
2. What are the common symptoms of code P0443 in a 2009 Ford Fusion?
Common symptoms include an illuminated Check Engine Light, slight decrease in fuel efficiency, or a failed emissions test. In most cases, there are no noticeable driving issues.
3. What causes the P0443 code to appear on a 2009 Ford Fusion?
The code can be triggered by a faulty EVAP purge control valve, damaged wiring or connectors in the circuit, or a blown fuse.
4. Can I drive my 2009 Ford Fusion with a P0443 code?
Yes, you can drive with this code, but it’s recommended to fix it as soon as possible to prevent potential emissions-related issues and ensure compliance with environmental regulations.
5. How do I diagnose the P0443 code on my 2009 Ford Fusion?
Start by inspecting the EVAP purge control valve, its wiring, and connectors for damage or corrosion. Use a multimeter to test the electrical circuit for proper voltage and continuity.
6. How do I fix the P0443 code on my 2009 Ford Fusion?
Repairs may include replacing the EVAP purge control valve, repairing or replacing damaged wiring, cleaning corroded connectors, or replacing a blown fuse.
7. Where is the EVAP purge control valve located on a 2009 Ford Fusion?
The EVAP purge control valve is typically located on or near the engine, close to the intake manifold or EVAP system components.
8. How much does it cost to fix a P0443 code on a 2009 Ford Fusion?
Repair costs vary but typically range from $100 to $300, depending on whether you need to replace the purge valve or repair associated wiring.
9. Can a P0443 code cause a failed emissions test?
Yes, since the EVAP system helps control fuel vapors, a malfunction can lead to increased emissions and cause your vehicle to fail an emissions test.
10. Does the P0443 code affect fuel economy on a 2009 Ford Fusion?
While the impact on fuel economy is usually minimal, a malfunctioning EVAP system can slightly reduce efficiency due to improper vapor management.
Discuss the causes and fixes for P0443 2009 Ford Fusion OBDII Code
Code P0443 2009 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
