P0443 2008 Nissan Altima Sedan Code - EVAP Canister Purge Volume Control Solenoid Valve
Quick Answer
This system controls the flow rate of fuel vapor from the EVAP canister. Common causes include Faulty EVAP Canister Purge Volume Control Solenoid Valve, EVAP Canister Purge Volume Control Solenoid Valve harness is open or shorted, EVAP Canister Purge Volume Control Solenoid Valve circuit poor electrical connection. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
- What it means
- P0443 2008 Nissan Altima Sedan indicates EVAP Canister Purge Volume Control Solenoid Valve.
- Common causes
- Common causes include Faulty EVAP Canister Purge Volume Control Solenoid Valve, EVAP Canister Purge Volume Control Solenoid Valve harness is open or shorted, EVAP Canister Purge Volume Control Solenoid Valve circuit poor electrical connection.
- Severity
- Low - monitor the vehicle and repair when practical.
- Can I drive?
- The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
Code P0443 2008 Nissan Altima Sedan Description
The EVAP canister purge volume control solenoid valve uses an ON/OFF duty to control the flow rate of fuel vapor from the EVAP canister. The EVAP canister purge volume control solenoid valve is moved by ON/OFF pulses from the ECM. The longer the ON pulse, the greater the amount of fuel vapor that will flow through the valve.
The Diagnostic Trouble Code (DTC) will set when the canister purge flow is detected during the specified driving conditions, even when the EVAP canister purge volume control solenoid valve is completely closed.
What are the Possible Causes of the DTC P0443 2008 Nissan Altima Sedan?
- Faulty EVAP Canister Purge Volume Control Solenoid Valve
- EVAP Canister Purge Volume Control Solenoid Valve harness is open or shorted
- EVAP Canister Purge Volume Control Solenoid Valve circuit poor electrical connection
- Faulty EVAP Control System Pressure Sensor
How to Fix the DTC P0443 2008 Nissan Altima Sedan?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0443 2008 Nissan Altima Sedan code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0443 2008 Nissan Altima Sedan code?
Need more information on how to fix the P0443 2008 Nissan Altima Sedan code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0443 2008 Nissan Altima Sedan code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0443 2008 Nissan Altima Sedan Code
1. What does the OBDII code P0443 on a 2008 Nissan Altima Sedan indicate?
The code P0443 on a 2008 Nissan Altima Sedan indicates a problem with the EVAP Canister Purge Volume Control Solenoid Valve.
2. What are common symptoms of a P0443 code on a 2008 Nissan Altima Sedan?
Common symptoms of a P0443 code include rough idling, decreased fuel efficiency, and the illumination of the check engine light on the dashboard.
3. What causes the P0443 code to trigger on a 2008 Nissan Altima Sedan?
The P0443 code is usually triggered by a faulty EVAP Canister Purge Volume Control Solenoid Valve, wiring issues, or a problem with the vehicle's evaporative emissions system.
4. How can I diagnose a P0443 code on my 2008 Nissan Altima Sedan?
Diagnosing a P0443 code typically involves checking the purge control solenoid valve for proper operation, inspecting the wiring for any damage, and testing the evaporative emissions system for leaks.
5. Can I continue driving my 2008 Nissan Altima Sedan with a P0443 code?
While the vehicle may still be operable with a P0443 code, it is recommended to address the issue promptly to prevent any potential damage to the engine or emissions system.
6. How can I repair a P0443 code on my 2008 Nissan Altima Sedan?
Repairing a P0443 code often involves replacing the EVAP Canister Purge Volume Control Solenoid Valve, repairing any damaged wiring, and clearing the code from the vehicle's computer.
7. Is it possible to reset a P0443 code on a 2008 Nissan Altima Sedan without fixing the issue?
Resetting the code without fixing the underlying problem may temporarily turn off the check engine light, but the code is likely to reappear once the issue persists.
8. How much does it typically cost to repair a P0443 code on a 2008 Nissan Altima Sedan?
The cost of repairing a P0443 code can vary depending on the root cause of the issue, but it may range from $100 to $300 for parts and labor.
9. Can a DIY enthusiast fix a P0443 code on a 2008 Nissan Altima Sedan?
While some DIY enthusiasts may have the skills to replace the EVAP Canister Purge Volume Control Solenoid Valve, it is recommended to consult a professional mechanic for proper diagnosis and repair.
10. How often does the P0443 code occur in 2008 Nissan Altima Sedans?
The P0443 code can occur sporadically in 2008 Nissan Altima Sedans, but regular maintenance and inspections of the evaporative emissions system can help prevent its occurrence.
Discuss the causes and fixes for P0443 2008 Nissan Altima Sedan OBDII Code
Code P0443 2008 Nissan Altima Sedan comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
