P0442 Hyundai Code - EVAP System Leak Detected Small Leak
Quick Answer
The Engine Control Module (ECM) tests the Evaporative Emission (EVAP) system for the following conditions: - Large and small leaks - Excess vacuum - Purge flow during non-commanded conditions - Fuel Level and Fuel Pressure sensor faults - EVAP Purge and Vent Valve faults The ECM monitors the Fuel Tank Pressure sensor in order to determine the level of vacuum/pressure in the EVAP system. Common causes include Missing or loose fuel cap, Incorrect fuel filler cap used, Fuel filler cap remains open or fails to close. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
- What it means
- P0442 Hyundai indicates EVAP System Leak Detected Small Leak.
- Common causes
- Common causes include Missing or loose fuel cap, Incorrect fuel filler cap used, Fuel filler cap remains open or fails to close.
- Severity
- Low - monitor the vehicle and repair when practical.
- Can I drive?
- The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
Code P0442 Hyundai Description
- Large and small leaks
- Excess vacuum
- Purge flow during non-commanded conditions
- Fuel Level and Fuel Pressure sensor faults
- EVAP Purge and Vent Valve faults
The ECM monitors the Fuel Tank Pressure sensor in order to determine the level of vacuum/pressure in the EVAP system. The ECM commands both the EVAP Purge Solenoid and the EVAP Vent Valve ON when the conditions are met in order to apply an engine vacuum to the EVAP system. The ECM commands the EVAP Purge Solenoid OFF once the system has reached a predetermined level of vacuum. This test verifies if a vacuum can be achieved in the EVAP system. Failure to develop a vacuum may be caused by a large leak or a restriction.
What are the Possible Causes of the DTC P0442 Hyundai?
- Missing or loose fuel cap
- Incorrect fuel filler cap used
- Fuel filler cap remains open or fails to close
- Foreign matter caught in fuel filler cap
- EVAP canister or fuel tank leaks
- EVAP system hose leaking
- Fuel tank leaking
How to Fix the DTC P0442 Hyundai?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0442 Hyundai code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0442 Hyundai code?
Need more information on how to fix the P0442 Hyundai code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0442 Hyundai code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0442 Hyundai Code
1. What are the common symptoms of OBDII code P0442 in a Hyundai, indicating an EVAP system leak detected small leak?
The common symptoms may include the check engine light illuminating on the dashboard and a slight gasoline odor around the vehicle.
2. What are the potential causes of OBDII code P0442 in a Hyundai?
The code P0442 usually indicates a small leak in the EVAP system, which can be caused by a loose gas cap, cracked or damaged EVAP hoses, or a faulty EVAP purge valve.
3. How serious is OBDII code P0442 in a Hyundai?
While the code P0442 is not an emergency, it should not be ignored as it can negatively impact the vehicle's emissions and fuel economy over time.
4. Can a loose gas cap trigger OBDII code P0442 in a Hyundai?
Yes, a loose, damaged, or missing gas cap is a common cause of the P0442 code, as it can allow fuel vapors to escape from the fuel tank.
5. How can I diagnose and repair OBDII code P0442 in my Hyundai?
Diagnosing the code usually involves checking the gas cap, inspecting EVAP system hoses for leaks, and testing the EVAP purge valve. Repair may involve tightening or replacing the gas cap, repairing or replacing damaged hoses, or replacing the purge valve if necessary.
6. Is it safe to continue driving with OBDII code P0442 in a Hyundai?
While it may be safe to drive with the code present, it is recommended to have the issue diagnosed and repaired as soon as possible to prevent further emissions-related problems.
7. Can extreme weather conditions trigger OBDII code P0442 in a Hyundai?
Yes, extreme temperature changes can sometimes cause the EVAP system components to expand or contract, potentially leading to small leaks and triggering the P0442 code.
8. Will resetting the check engine light make OBDII code P0442 go away in a Hyundai?
Resetting the check engine light may temporarily clear the code, but if the underlying issue causing the P0442 code is not addressed, the code is likely to return.
9. How much does it typically cost to repair OBDII code P0442 in a Hyundai?
The cost of repairing the P0442 code can vary depending on the specific cause of the issue and labor rates in your area. Repairs may range from a simple gas cap replacement to more extensive EVAP system repairs.
10. Can a DIY enthusiast fix OBDII code P0442 in a Hyundai?
Depending on the cause of the code, some DIY enthusiasts may be able to address the issue themselves by checking and tightening the gas cap or inspecting and replacing damaged hoses. However, more complex repairs may require professional assistance.
Discuss the causes and fixes for P0442 Hyundai OBDII Code
Code P0442 Hyundai comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
