AutoCodes – Nissan – P0442 2010 Nissan Rogue

P0442 2010 Nissan Rogue Code - EVAP Control System Leak Detected Small Leak

Quick Answer

The Engine Control Module (ECM) tests the Evaporative Emission (EVAP) system for the following conditions: - Large and small leaks - Excess vacuum - Purge flow during non-commanded conditions - Fuel Level and Fuel Pressure sensor faults - EVAP Purge and Vent Valve faults The ECM monitors the Fuel Tank Pressure sensor in order to determine the level of vacuum/pressure in the EVAP system. Common causes include Missing or loose fuel cap, Incorrect fuel filler cap used, Fuel filler cap remains open or fails to close. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

What it means: P0442 2010 Nissan Rogue indicates EVAP Control System Leak Detected Small Leak.
Common causes: Common causes include Missing or loose fuel cap, Incorrect fuel filler cap used, Fuel filler cap remains open or fails to close.
Severity: Low - monitor the vehicle and repair when practical.
Can I drive?: The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 5,120

How popular is this code, among other codes? Low

Repair Importance Level

Low (Monitor) (1 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 19, 2020

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0442 2010 Nissan Rogue Description

The Engine Control Module (ECM) tests the Evaporative Emission (EVAP) system for the following conditions:
- Large and small leaks
- Excess vacuum
- Purge flow during non-commanded conditions
- Fuel Level and Fuel Pressure sensor faults
- EVAP Purge and Vent Valve faults
The ECM monitors the Fuel Tank Pressure sensor in order to determine the level of vacuum/pressure in the EVAP system. The ECM commands both the EVAP Purge Solenoid and the EVAP Vent Valve ON when the conditions are met in order to apply an engine vacuum to the EVAP system. The ECM commands the EVAP Purge Solenoid OFF once the system has reached a predetermined level of vacuum. This test verifies if a vacuum can be achieved in the EVAP system. Failure to develop a vacuum may be caused by a large leak or a restriction.

OBDII Code P0442 2010 Nissan Rogue - EVAP Control System Leak Detected Small Leak - AutoCodes.com — P0442 2010 Nissan Rogue Code - EVAP Control System Leak Detected Small Leak

What does this mean?

What are the Possible Causes of the DTC P0442 2010 Nissan Rogue?

Missing or loose fuel cap
Incorrect fuel filler cap used
Fuel filler cap remains open or fails to close
Foreign matter caught in fuel filler cap
EVAP canister or fuel tank leaks
EVAP system hose leaking
Fuel tank leaking

How to Fix the DTC P0442 2010 Nissan Rogue?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

The fuel tank filler cap and the Purge Volume Control Valve are the more common problems that will trigger the P0442 code on Nissan vehicles.

There is a factory Nissan service bulletin to help diagnose the P0442 code:
Nissan Factory Service Bulletin OBDII Code P0442

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0442 2010 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0442 2010 Nissan Rogue code?

Need more information on how to fix the P0442 2010 Nissan Rogue code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0442 2010 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0442 2010 Nissan Rogue Code

1. What does the OBDII code P0442 on a 2010 Nissan Rogue indicate?

The code P0442 on a 2010 Nissan Rogue indicates that the EVAP control system has detected a small leak.

2. What are common symptoms of a P0442 code in a 2010 Nissan Rogue?

Common symptoms of a P0442 code in a 2010 Nissan Rogue may include a check engine light illuminated on the dashboard and the smell of gasoline near the vehicle.

3. What are possible causes of the P0442 code in a 2010 Nissan Rogue?

Possible causes of the P0442 code in a 2010 Nissan Rogue include a loose or damaged gas cap, a cracked or damaged EVAP hose, a faulty EVAP canister, or a malfunctioning purge valve.

4. How serious is the P0442 code on a 2010 Nissan Rogue?

While the P0442 code may not have an immediate impact on the performance of the vehicle, it is important to address the issue promptly to prevent potential fuel system leaks and emissions problems.

5. Can I continue driving my 2010 Nissan Rogue with a P0442 code?

It is generally safe to continue driving your 2010 Nissan Rogue with a P0442 code, but it is recommended to have the issue diagnosed and repaired as soon as possible to avoid potential issues with the vehicle's emissions system.

6. How can I diagnose a P0442 code in my 2010 Nissan Rogue?

Diagnosing a P0442 code in a 2010 Nissan Rogue may involve checking the gas cap for tightness, inspecting the EVAP system components for damage or leaks, and using a scan tool to monitor the system for proper operation.

7. What are some repair tips for fixing a P0442 code on a 2010 Nissan Rogue?

Repair tips for fixing a P0442 code on a 2010 Nissan Rogue may include tightening or replacing the gas cap, repairing or replacing damaged EVAP system components, and clearing the code with a scan tool after completing the repairs.

8. How much does it cost to repair a P0442 code on a 2010 Nissan Rogue?

The cost to repair a P0442 code on a 2010 Nissan Rogue can vary depending on the specific cause of the issue and the labor rates in your area. In general, repairs for this code may range from $100 to $500.

9. Can I clear a P0442 code on my 2010 Nissan Rogue without fixing the issue?

While you can clear the P0442 code on your 2010 Nissan Rogue with a scan tool, it is not recommended to do so without addressing the underlying problem, as it may result in the code reappearing and potential emissions issues.

10. How can I prevent the P0442 code from recurring in my 2010 Nissan Rogue?

To prevent the P0442 code from recurring in your 2010 Nissan Rogue, make sure to tighten the gas cap properly after refueling, regularly inspect the EVAP system components for damage, and address any issues promptly to maintain proper system operation.