P0442 2005 Nissan Maxima Code - EVAP Control System Leak Detected Small Leak
Quick Answer
The Engine Control Module (ECM) tests the Evaporative Emission (EVAP) system for the following conditions: - Large and small leaks - Excess vacuum - Purge flow during non-commanded conditions - Fuel Level and Fuel Pressure sensor faults - EVAP Purge and Vent Valve faults The ECM monitors the Fuel Tank Pressure sensor in order to determine the level of vacuum/pressure in the EVAP system. Common causes include Missing or loose fuel cap, Incorrect fuel filler cap used, Fuel filler cap remains open or fails to close. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
- What it means
- P0442 2005 Nissan Maxima indicates EVAP Control System Leak Detected Small Leak.
- Common causes
- Common causes include Missing or loose fuel cap, Incorrect fuel filler cap used, Fuel filler cap remains open or fails to close.
- Severity
- Low - monitor the vehicle and repair when practical.
- Can I drive?
- The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
Code P0442 2005 Nissan Maxima Description
- Large and small leaks
- Excess vacuum
- Purge flow during non-commanded conditions
- Fuel Level and Fuel Pressure sensor faults
- EVAP Purge and Vent Valve faults
The ECM monitors the Fuel Tank Pressure sensor in order to determine the level of vacuum/pressure in the EVAP system. The ECM commands both the EVAP Purge Solenoid and the EVAP Vent Valve ON when the conditions are met in order to apply an engine vacuum to the EVAP system. The ECM commands the EVAP Purge Solenoid OFF once the system has reached a predetermined level of vacuum. This test verifies if a vacuum can be achieved in the EVAP system. Failure to develop a vacuum may be caused by a large leak or a restriction.
What are the Possible Causes of the DTC P0442 2005 Nissan Maxima?
- Missing or loose fuel cap
- Incorrect fuel filler cap used
- Fuel filler cap remains open or fails to close
- Foreign matter caught in fuel filler cap
- EVAP canister or fuel tank leaks
- EVAP system hose leaking
- Fuel tank leaking
How to Fix the DTC P0442 2005 Nissan Maxima?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
There is a factory Nissan service bulletin to help diagnose the P0442 code:
Nissan Factory Service Bulletin OBDII Code P0442
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0442 2005 Nissan Maxima code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0442 2005 Nissan Maxima code?
Need more information on how to fix the P0442 2005 Nissan Maxima code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0442 2005 Nissan Maxima code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0442 2005 Nissan Maxima Code
1. What does the OBDII code P0442 mean for a 2005 Nissan Maxima?
The code P0442 indicates that the EVAP control system has detected a small leak.
2. What are the common symptoms of a P0442 code in a 2005 Nissan Maxima?
Common symptoms include the check engine light coming on, a slight decrease in fuel efficiency, and the smell of gasoline around the vehicle.
3. What are some possible causes of a P0442 code in a 2005 Nissan Maxima?
Potential causes include a loose or damaged gas cap, a cracked or damaged EVAP hose, a faulty EVAP canister, or issues with the purge valve.
4. How can I diagnose a P0442 code in my 2005 Nissan Maxima?
Diagnosis typically involves checking the gas cap for tightness, inspecting the EVAP system for visible leaks or damage, and using a smoke machine to pinpoint the exact location of the leak.
5. Can I continue driving my 2005 Nissan Maxima with a P0442 code?
While driving with a P0442 code may not immediately impact vehicle performance, it is recommended to address the issue promptly to prevent potential damage to the emission control system.
6. How can I repair a P0442 code in my 2005 Nissan Maxima?
Repair steps may include tightening or replacing the gas cap, repairing or replacing damaged hoses, replacing the EVAP canister or purge valve, and clearing the code with an OBDII scanner.
7. Are there any DIY tips for fixing a P0442 code in a 2005 Nissan Maxima?
DIY tips include ensuring the gas cap is tightened properly, visually inspecting hoses for cracks or damage, and using a code reader to clear the code after making repairs.
8. Will a P0442 code in a 2005 Nissan Maxima cause emissions test failure?
Yes, a P0442 code can cause your vehicle to fail emissions testing, as it indicates a leak in the EVAP control system, which is an important component of emissions control.
9. How much does it typically cost to repair a P0442 code in a 2005 Nissan Maxima?
Repair costs can vary depending on the specific issue causing the code, but they may range from $100 to $500, including parts and labor.
10. Can a P0442 code in a 2005 Nissan Maxima clear on its own?
In some cases, the code may clear on its own after a few driving cycles if the issue was minor, such as a loose gas cap. However, it is still recommended to diagnose and address the root cause of the code.
Discuss the causes and fixes for P0442 2005 Nissan Maxima OBDII Code
Code P0442 2005 Nissan Maxima comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
