AutoCodes – Nissan – P0441 2013 Nissan Rogue

P0441 2013 Nissan Rogue Code - Evaporative Control System Incorrect Purge Flow

Quick Answer

The Engine Control Module (ECM) tests the Evaporative Emission (EVAP) system for the following conditions: - Large and small leaks - Excess vacuum - Purge flow during non-commanded conditions - Fuel Level and Fuel Pressure sensor faults - EVAP Purge and Vent Valve faults The ECM monitors the Fuel Tank Pressure sensor in order to determine the level of vacuum/pressure in the EVAP system. Common causes include EVAP canister purge volume control solenoid valve stuck closed, EVAP control system pressure sensor and the circuit, Loose, disconnected or improper connection of rubber tube. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

What it means
P0441 2013 Nissan Rogue indicates Evaporative Control System Incorrect Purge Flow.
Common causes
Common causes include EVAP canister purge volume control solenoid valve stuck closed, EVAP control system pressure sensor and the circuit, Loose, disconnected or improper connection of rubber tube.
Severity
Low - monitor the vehicle and repair when practical.
Can I drive?
The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 3,149
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Jun 14, 2020
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P0441 2013 Nissan Rogue Description

The Engine Control Module (ECM) tests the Evaporative Emission (EVAP) system for the following conditions:
- Large and small leaks
- Excess vacuum
- Purge flow during non-commanded conditions
- Fuel Level and Fuel Pressure sensor faults
- EVAP Purge and Vent Valve faults
The ECM monitors the Fuel Tank Pressure sensor in order to determine the level of vacuum/pressure in the EVAP system. The ECM commands both the EVAP Purge Solenoid and the EVAP Vent Valve ON when the conditions are met in order to apply an engine vacuum to the EVAP system. The ECM commands the EVAP Purge Solenoid OFF once the system has reached a predetermined level of vacuum. This test verifies if a vacuum can be achieved in the EVAP system. Failure to develop a vacuum may be caused by a large leak or a restriction.
OBDII Code P0441 2013 Nissan Rogue - Evaporative Control System Incorrect Purge Flow - AutoCodes.com
P0441 2013 Nissan Rogue Code - Evaporative Control System Incorrect Purge Flow

What are the Possible Causes of the DTC P0441 2013 Nissan Rogue?

  • EVAP canister purge volume control solenoid valve stuck closed
  • EVAP control system pressure sensor and the circuit
  • Loose, disconnected or improper connection of rubber tube
  • Blocked rubber tube
  • Cracked EVAP canister
  • EVAP canister purge volume control solenoid valve circuit
  • Accelerator pedal position sensor
  • Blocked purge port
  • EVAP canister vent control valve

How to Fix the DTC P0441 2013 Nissan Rogue?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

Code Tech Notes

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0441 2013 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0441 2013 Nissan Rogue code?

Need more information on how to fix the P0441 2013 Nissan Rogue code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0441 2013 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0441 2013 Nissan Rogue Code

1. What are the common symptoms of OBDII code P0441 on a 2013 Nissan Rogue?

- Common symptoms include the Check Engine Light illuminating, a strong fuel odor, and potential issues with the vehicle's fuel economy.

2. What can cause the OBDII code P0441 to appear on a 2013 Nissan Rogue?

- The code P0441 typically indicates a problem with the Evaporative Emission Control System, often caused by a faulty purge valve, a leak in the system, or a malfunctioning charcoal canister.

3. How can I diagnose the cause of OBDII code P0441 on my 2013 Nissan Rogue?

- Diagnosing the issue involves inspecting the purge valve, checking for leaks in the system, testing the charcoal canister, and ensuring the gas cap is properly sealed.

4. Can a loose gas cap trigger code P0441 on a 2013 Nissan Rogue?

- Yes, a loose or improperly sealed gas cap can trigger the P0441 code by causing a leak in the Evaporative Emission Control System.

5. What are some repair tips for fixing OBDII code P0441 on a 2013 Nissan Rogue?

- Repair tips include tightening or replacing the gas cap, inspecting and replacing the purge valve, checking for leaks in the system, and verifying the functionality of the charcoal canister.

6. Is it safe to continue driving my 2013 Nissan Rogue with OBDII code P0441?

- While the vehicle may still be safe to drive with the P0441 code, it is recommended to address the issue promptly to prevent potential damage to the emission control system and ensure optimal vehicle performance.

7. Can a DIY enthusiast fix OBDII code P0441 on a 2013 Nissan Rogue?

- Depending on the skill level and tools available, DIY enthusiasts may be able to address the P0441 code by following repair guides, but complex issues may require professional diagnosis and repair.

8. How much does it typically cost to repair OBDII code P0441 on a 2013 Nissan Rogue?

- The cost of repairing the P0441 code can vary depending on the cause of the issue, but expenses may include parts like a new purge valve or charcoal canister, labor costs, and diagnostic fees.

9. Will resetting the Check Engine Light resolve OBDII code P0441 on a 2013 Nissan Rogue?

- Resetting the Check Engine Light may temporarily clear the code, but if the underlying issue causing the P0441 code is not addressed, the light is likely to come back on.

10. How often does OBDII code P0441 occur in 2013 Nissan Rogues?

- OBDII code P0441, indicating an Evaporative Control System Incorrect Purge Flow issue, is a relatively common problem in 2013 Nissan Rogues due to the complexity of the vehicle's emission control system.

Discuss the causes and fixes for P0441 2013 Nissan Rogue OBDII Code

Code P0441 2013 Nissan Rogue comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play