P0441 2009 Nissan Rogue Code - Evaporative Control System Incorrect Purge Flow
Quick Answer
The Engine Control Module (ECM) tests the Evaporative Emission (EVAP) system for the following conditions: - Large and small leaks - Excess vacuum - Purge flow during non-commanded conditions - Fuel Level and Fuel Pressure sensor faults - EVAP Purge and Vent Valve faults The ECM monitors the Fuel Tank Pressure sensor in order to determine the level of vacuum/pressure in the EVAP system. Common causes include EVAP canister purge volume control solenoid valve stuck closed, EVAP control system pressure sensor and the circuit, Loose, disconnected or improper connection of rubber tube. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
- What it means
- P0441 2009 Nissan Rogue indicates Evaporative Control System Incorrect Purge Flow.
- Common causes
- Common causes include EVAP canister purge volume control solenoid valve stuck closed, EVAP control system pressure sensor and the circuit, Loose, disconnected or improper connection of rubber tube.
- Severity
- Low - monitor the vehicle and repair when practical.
- Can I drive?
- The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
Code P0441 2009 Nissan Rogue Description
- Large and small leaks
- Excess vacuum
- Purge flow during non-commanded conditions
- Fuel Level and Fuel Pressure sensor faults
- EVAP Purge and Vent Valve faults
The ECM monitors the Fuel Tank Pressure sensor in order to determine the level of vacuum/pressure in the EVAP system. The ECM commands both the EVAP Purge Solenoid and the EVAP Vent Valve ON when the conditions are met in order to apply an engine vacuum to the EVAP system. The ECM commands the EVAP Purge Solenoid OFF once the system has reached a predetermined level of vacuum. This test verifies if a vacuum can be achieved in the EVAP system. Failure to develop a vacuum may be caused by a large leak or a restriction.
What are the Possible Causes of the DTC P0441 2009 Nissan Rogue?
- EVAP canister purge volume control solenoid valve stuck closed
- EVAP control system pressure sensor and the circuit
- Loose, disconnected or improper connection of rubber tube
- Blocked rubber tube
- Cracked EVAP canister
- EVAP canister purge volume control solenoid valve circuit
- Accelerator pedal position sensor
- Blocked purge port
- EVAP canister vent control valve
How to Fix the DTC P0441 2009 Nissan Rogue?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0441 2009 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0441 2009 Nissan Rogue code?
Need more information on how to fix the P0441 2009 Nissan Rogue code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0441 2009 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0441 2009 Nissan Rogue Code
1. What does the OBDII code P0441 mean on a 2009 Nissan Rogue?
P0441 indicates an "Evaporative Control System Incorrect Purge Flow," meaning the EVAP system is not purging fuel vapors correctly.
2. What are the common symptoms of the P0441 code on a 2009 Nissan Rogue?
Symptoms may include the check engine light turning on, a slight decrease in fuel efficiency, and a possible fuel odor near the vehicle.
3. What causes the P0441 code on a 2009 Nissan Rogue?
Common causes include a faulty purge valve, clogged or damaged EVAP hoses, a malfunctioning charcoal canister, or a failed EVAP system sensor.
4. Can I drive my 2009 Nissan Rogue with the P0441 code?
Yes, you can drive the vehicle, but it’s best to address the issue promptly to avoid potential fuel vapor emissions problems or further damage to the EVAP system.
5. How do I fix the P0441 code on a 2009 Nissan Rogue?
Repairs may involve replacing the purge valve, inspecting and repairing EVAP hoses, cleaning or replacing the charcoal canister, or repairing wiring to the EVAP sensors.
6. How do I test the purge valve on my 2009 Nissan Rogue?
You can test the purge valve using a vacuum pump or multimeter to check for proper operation and electrical continuity.
7. Can a loose gas cap cause the P0441 code on a 2009 Nissan Rogue?
While a loose gas cap is less likely to specifically trigger P0441, it’s worth checking since it can cause related EVAP system issues.
8. How much does it cost to repair the P0441 code on a 2009 Nissan Rogue?
Repairs can range from $50 to $300 depending on whether you need to replace the purge valve, repair hoses, or address other EVAP components.
9. Will clearing the P0441 code fix the problem on a 2009 Nissan Rogue?
Clearing the code will turn off the check engine light temporarily, but if the underlying issue isn’t resolved, the code will return.
10. Does the P0441 code affect emissions testing on a 2009 Nissan Rogue?
Yes, the P0441 code will likely cause the vehicle to fail an emissions test because it indicates a problem with the EVAP system.
Discuss the causes and fixes for P0441 2009 Nissan Rogue OBDII Code
Code P0441 2009 Nissan Rogue comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
