P0441 2008 Nissan Maxima Code - Evaporative Control System Incorrect Purge Flow
Quick Answer
The Engine Control Module (ECM) tests the Evaporative Emission (EVAP) system for the following conditions: - Large and small leaks - Excess vacuum - Purge flow during non-commanded conditions - Fuel Level and Fuel Pressure sensor faults - EVAP Purge and Vent Valve faults The ECM monitors the Fuel Tank Pressure sensor in order to determine the level of vacuum/pressure in the EVAP system. Common causes include EVAP canister purge volume control solenoid valve stuck closed, EVAP control system pressure sensor and the circuit, Loose, disconnected or improper connection of rubber tube. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
- What it means
- P0441 2008 Nissan Maxima indicates Evaporative Control System Incorrect Purge Flow.
- Common causes
- Common causes include EVAP canister purge volume control solenoid valve stuck closed, EVAP control system pressure sensor and the circuit, Loose, disconnected or improper connection of rubber tube.
- Severity
- Low - monitor the vehicle and repair when practical.
- Can I drive?
- The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
Code P0441 2008 Nissan Maxima Description
- Large and small leaks
- Excess vacuum
- Purge flow during non-commanded conditions
- Fuel Level and Fuel Pressure sensor faults
- EVAP Purge and Vent Valve faults
The ECM monitors the Fuel Tank Pressure sensor in order to determine the level of vacuum/pressure in the EVAP system. The ECM commands both the EVAP Purge Solenoid and the EVAP Vent Valve ON when the conditions are met in order to apply an engine vacuum to the EVAP system. The ECM commands the EVAP Purge Solenoid OFF once the system has reached a predetermined level of vacuum. This test verifies if a vacuum can be achieved in the EVAP system. Failure to develop a vacuum may be caused by a large leak or a restriction.
What are the Possible Causes of the DTC P0441 2008 Nissan Maxima?
- EVAP canister purge volume control solenoid valve stuck closed
- EVAP control system pressure sensor and the circuit
- Loose, disconnected or improper connection of rubber tube
- Blocked rubber tube
- Cracked EVAP canister
- EVAP canister purge volume control solenoid valve circuit
- Accelerator pedal position sensor
- Blocked purge port
- EVAP canister vent control valve
How to Fix the DTC P0441 2008 Nissan Maxima?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0441 2008 Nissan Maxima code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0441 2008 Nissan Maxima code?
Need more information on how to fix the P0441 2008 Nissan Maxima code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0441 2008 Nissan Maxima code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0441 2008 Nissan Maxima Code
1. What does the OBDII code P0441 mean on a 2008 Nissan Maxima?
P0441 indicates an issue with the Evaporative Emission Control (EVAP) system, specifically an incorrect purge flow, meaning the system is not properly controlling fuel vapor flow.
2. What are the symptoms of a P0441 code on a 2008 Nissan Maxima?
Common symptoms include the check engine light turning on, reduced fuel efficiency, and in rare cases, a noticeable fuel odor near the vehicle.
3. What causes the P0441 code on a 2008 Nissan Maxima?
Potential causes include a faulty purge valve, a clogged or disconnected EVAP hose, a defective vent control valve, or a damaged charcoal canister.
4. Can a loose gas cap trigger the P0441 code on a 2008 Nissan Maxima?
While uncommon, a loose or faulty gas cap can contribute to EVAP system issues and potentially trigger this code.
5. How do I diagnose the P0441 code on my 2008 Nissan Maxima?
Inspect the gas cap for proper fit, check EVAP hoses for damage or disconnection, test the purge valve for functionality, and use a scan tool to monitor EVAP system pressure.
6. Is it safe to drive a 2008 Nissan Maxima with a P0441 code?
Yes, the car is generally safe to drive, but ignoring the issue can lead to decreased fuel efficiency and may cause further emissions-related problems.
7. How do I fix the P0441 code on a 2008 Nissan Maxima?
Common fixes include replacing the purge valve, repairing damaged hoses, replacing the vent control valve, or cleaning/replacing the charcoal canister.
8. How much does it cost to repair the P0441 code on a 2008 Nissan Maxima?
Repair costs can range from $50 to $250 depending on whether you need to replace the purge valve, vent valve, or other components.
9. Can a P0441 code cause my 2008 Nissan Maxima to fail an emissions test?
Yes, since P0441 relates to the EVAP system, it will likely cause your vehicle to fail an emissions test.
10. Do I need a professional mechanic to fix the P0441 code on my 2008 Nissan Maxima?
While some issues like replacing a gas cap or checking hoses can be done DIY, diagnosing and repairing EVAP components like the purge valve may require professional tools and expertise.
Discuss the causes and fixes for P0441 2008 Nissan Maxima OBDII Code
Code P0441 2008 Nissan Maxima comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
