P0441 2004 Nissan Maxima Code - Evaporative Control System Incorrect Purge Flow
Quick Answer
The Engine Control Module (ECM) tests the Evaporative Emission (EVAP) system for the following conditions: - Large and small leaks - Excess vacuum - Purge flow during non-commanded conditions - Fuel Level and Fuel Pressure sensor faults - EVAP Purge and Vent Valve faults The ECM monitors the Fuel Tank Pressure sensor in order to determine the level of vacuum/pressure in the EVAP system. Common causes include EVAP canister purge volume control solenoid valve stuck closed, EVAP control system pressure sensor and the circuit, Loose, disconnected or improper connection of rubber tube. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
- What it means
- P0441 2004 Nissan Maxima indicates Evaporative Control System Incorrect Purge Flow.
- Common causes
- Common causes include EVAP canister purge volume control solenoid valve stuck closed, EVAP control system pressure sensor and the circuit, Loose, disconnected or improper connection of rubber tube.
- Severity
- Low - monitor the vehicle and repair when practical.
- Can I drive?
- The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
Code P0441 2004 Nissan Maxima Description
- Large and small leaks
- Excess vacuum
- Purge flow during non-commanded conditions
- Fuel Level and Fuel Pressure sensor faults
- EVAP Purge and Vent Valve faults
The ECM monitors the Fuel Tank Pressure sensor in order to determine the level of vacuum/pressure in the EVAP system. The ECM commands both the EVAP Purge Solenoid and the EVAP Vent Valve ON when the conditions are met in order to apply an engine vacuum to the EVAP system. The ECM commands the EVAP Purge Solenoid OFF once the system has reached a predetermined level of vacuum. This test verifies if a vacuum can be achieved in the EVAP system. Failure to develop a vacuum may be caused by a large leak or a restriction.
What are the Possible Causes of the DTC P0441 2004 Nissan Maxima?
- EVAP canister purge volume control solenoid valve stuck closed
- EVAP control system pressure sensor and the circuit
- Loose, disconnected or improper connection of rubber tube
- Blocked rubber tube
- Cracked EVAP canister
- EVAP canister purge volume control solenoid valve circuit
- Accelerator pedal position sensor
- Blocked purge port
- EVAP canister vent control valve
How to Fix the DTC P0441 2004 Nissan Maxima?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0441 2004 Nissan Maxima code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0441 2004 Nissan Maxima code?
Need more information on how to fix the P0441 2004 Nissan Maxima code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0441 2004 Nissan Maxima code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0441 2004 Nissan Maxima Code
1. What does OBDII code P0441 mean for a 2004 Nissan Maxima?
P0441 indicates "Evaporative Emission Control System Incorrect Purge Flow," meaning the EVAP system is not properly managing fuel vapors.
2. What are the symptoms of code P0441 in a 2004 Nissan Maxima?
Symptoms may include the check engine light turning on, reduced fuel efficiency, or a faint fuel smell near the vehicle.
3. What causes P0441 to occur in a 2004 Nissan Maxima?
Common causes include a faulty purge valve, a clogged or damaged EVAP canister, loose or damaged hoses, or a defective fuel cap.
4. Can P0441 cause drivability issues in a 2004 Nissan Maxima?
Generally, P0441 does not affect drivability, but it can lead to increased emissions and reduced fuel economy.
5. How do I fix the P0441 code on a 2004 Nissan Maxima?
Start by checking the gas cap for damage or looseness. If that’s not the issue, inspect the purge valve, EVAP canister, and hoses for damage or clogging, and replace faulty components as needed.
6. Is it safe to drive with a P0441 code on a 2004 Nissan Maxima?
Yes, it’s typically safe to drive, but you should address the issue promptly to avoid potential damage to the EVAP system and ensure emissions compliance.
7. How can I test the purge valve for P0441 on a 2004 Nissan Maxima?
You can test the purge valve with a multimeter to check for proper resistance or apply vacuum to confirm it opens and closes as it should.
8. Can a loose gas cap trigger a P0441 code on a 2004 Nissan Maxima?
Yes, a loose or damaged gas cap can disrupt the EVAP system and trigger the P0441 code.
9. How much does it cost to fix a P0441 code on a 2004 Nissan Maxima?
Repair costs can vary, but replacing a purge valve typically costs between $100 and $200, while other components may increase the cost.
10. Will clearing the P0441 code solve the issue in a 2004 Nissan Maxima?
Clearing the code will turn off the check engine light temporarily, but the underlying issue must be fixed to prevent the code from returning.
Discuss the causes and fixes for P0441 2004 Nissan Maxima OBDII Code
Code P0441 2004 Nissan Maxima comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
