AutoCodes – Toyota – P043F 2006 Toyota Camry

P043F 2006 Toyota Camry Code - Evaporative Emission System Leak Detection Reference Orifice High Flow

Quick Answer

5 hours after the ignition switch is turned OFF, the electric vacuum pump creates negative pressure (vacuum) in the EVAP (Evaporative Emission) system. Common causes include Faulty Vacuum Pump Module, Vacuum Pump Module harness is open or shorted, Vacuum Pump Module circuit poor electrical connection. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

What it means: P043F 2006 Toyota Camry indicates Evaporative Emission System Leak Detection Reference Orifice High Flow.
Common causes: Common causes include Faulty Vacuum Pump Module, Vacuum Pump Module harness is open or shorted, Vacuum Pump Module circuit poor electrical connection.
Severity: Low - monitor the vehicle and repair when practical.
Can I drive?: The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,251

How popular is this code, among other codes? Low

Repair Importance Level

Low (Monitor) (1 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P043F 2006 Toyota Camry Description

5 hours after the ignition switch is turned OFF, the electric vacuum pump creates negative pressure (vacuum) in the EVAP (Evaporative Emission) system. The Engine Control Module (ECM) monitors for leaks and actuator malfunctions based on the EVAP pressure.

OBDII Code P043F 2006 Toyota Camry - Evaporative Emission System Leak Detection Reference Orifice High Flow - AutoCodes.com — P043F 2006 Toyota Camry Code - Evaporative Emission System Leak Detection Reference Orifice High Flow

What does this mean?

What are the Possible Causes of the DTC P043F 2006 Toyota Camry?

Faulty Vacuum Pump Module
Vacuum Pump Module harness is open or shorted
Vacuum Pump Module circuit poor electrical connection.
Faulty Engine Control Module (ECM)

How to Fix the DTC P043F 2006 Toyota Camry?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P043F 2006 Toyota Camry code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P043F 2006 Toyota Camry code?

Need more information on how to fix the P043F 2006 Toyota Camry code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P043F 2006 Toyota Camry code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P043F 2006 Toyota Camry Code

1. What does the OBDII code P043F mean on a 2006 Toyota Camry?

P043F indicates an issue with the Evaporative Emission System (EVAP), specifically that the Leak Detection Reference Orifice is showing higher-than-expected flow, which could point to a malfunction.

2. What are common symptoms of the P043F code in a 2006 Toyota Camry?

The most common symptoms include an illuminated Check Engine Light, possible fuel odor near the vehicle, and, in rare cases, slightly reduced fuel efficiency.

3. What causes the P043F code to appear on a 2006 Toyota Camry?

The code can be caused by a faulty EVAP leak detection pump, a damaged or disconnected EVAP hose, a failing purge or vent valve, or a clogged or malfunctioning reference orifice.

4. Can a loose gas cap trigger the P043F code on a 2006 Toyota Camry?

While a loose gas cap can trigger other EVAP-related codes, the P043F code is more likely caused by issues with the leak detection pump or reference orifice rather than the gas cap.

5. How can I diagnose the P043F code in my 2006 Toyota Camry?

Use an OBDII scanner to confirm the code, then inspect the EVAP system for damaged hoses, check the leak detection pump for proper operation, and test the reference orifice for clogs or excessive flow.

6. Is it safe to drive with the P043F code on a 2006 Toyota Camry?

Yes, it is generally safe to drive with this code, but ignoring it can lead to failing an emissions test or potential long-term damage to the EVAP system.

7. What repairs are commonly needed to fix the P043F code in a 2006 Toyota Camry?

Repairs may include replacing the EVAP leak detection pump, clearing clogs in the reference orifice, repairing or replacing damaged EVAP hoses, or replacing a faulty purge or vent valve.

8. How much does it cost to fix the P043F code on a 2006 Toyota Camry?

The cost can range from $100 to $500 depending on whether the issue is a simple hose repair or a replacement of the leak detection pump or other EVAP components.

9. Can I fix the P043F code on my 2006 Toyota Camry myself?

If you're experienced with car repairs, you can inspect hoses and components for damage, clean the reference orifice, or replace the leak detection pump with basic tools. Otherwise, it's best to consult a mechanic.

10. Will clearing the P043F code without repairs solve the problem?

Clearing the code without addressing the root cause may temporarily turn off the Check Engine Light, but the issue is likely to return until proper repairs are made.