P043E 2019 Honda CR-V Code - Evaporative Emission Leak Check Module Standard Pressure Low
Quick Answer
The Powertrain Control Module (PCM) starts the Evaporative Emission (EVAP) system diagnosis after the vehicle has been turned to the OFF (LOCK) mode and has met all other enable conditions (initial engine coolant temperature and off for at least 5 hours). Common causes include Faulty Vacuum Pump, Faulty Vacuum Pump (Motor), Faulty Control Valve. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P043E 2019 Honda CR-V indicates Evaporative Emission Leak Check Module Standard Pressure Low.
- Common causes
- Common causes include Faulty Vacuum Pump, Faulty Vacuum Pump (Motor), Faulty Control Valve.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P043E 2019 Honda CR-V Description
A malfunction is detected, and a Diagnostic Trouble Code (DTC) is stored when changes in the pressure are equal to or less than the prescribed value after the prescribed time of starting the system pressure reduction.
What are the Possible Causes of the DTC P043E 2019 Honda CR-V?
- Faulty Vacuum Pump
- Faulty Vacuum Pump (Motor)
- Faulty Control Valve
- Reference orifice flow quantity is excessive
- Reference orifice flow quantity is too low
How to Fix the DTC P043E 2019 Honda CR-V?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P043E 2019 Honda CR-V code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P043E 2019 Honda CR-V code?
Need more information on how to fix the P043E 2019 Honda CR-V code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P043E 2019 Honda CR-V code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P043E 2019 Honda CR-V Code
1. What are the common symptoms of OBDII code P043E in a 2019 Honda CR-V?
- Common symptoms include the illumination of the check engine light, decreased fuel efficiency, and potential issues with the vehicle's emissions system.
2. What does the OBDII code P043E indicate specifically for a 2019 Honda CR-V?
- The code P043E signifies a problem with the Evaporative Emission Leak Check Module Standard Pressure being low in the vehicle's emission system.
3. What are the possible causes of OBDII code P043E in a 2019 Honda CR-V?
- Potential causes include a loose or damaged gas cap, leaks in the evaporative emission system, faulty purge valve, or issues with the pressure sensor in the system.
4. How can I diagnose the cause of OBDII code P043E in my 2019 Honda CR-V?
- Diagnosing the issue may involve visually inspecting the gas cap for tightness, checking for visible damage or leaks in the emission system, and using an OBDII scanner to analyze the system's data.
5. Can driving with the OBDII code P043E illuminated in a 2019 Honda CR-V cause further damage?
- Driving with the code P043E may not cause immediate harm to the vehicle but could lead to decreased fuel efficiency and potentially result in the vehicle failing an emissions test.
6. How can I clear the OBDII code P043E in my 2019 Honda CR-V?
- Clearing the code can be done by using an OBDII scanner to reset the vehicle's computer after addressing the underlying issue that triggered the code.
7. Is it safe to continue driving my 2019 Honda CR-V with the check engine light on due to code P043E?
- It is generally safe to drive the vehicle with the check engine light on, but it is recommended to address the issue promptly to avoid potential long-term damage and ensure optimal vehicle performance.
8. Will fixing the gas cap resolve the OBDII code P043E issue in a 2019 Honda CR-V?
- Fixing a loose or damaged gas cap is a common solution for code P043E, but if the issue persists after securing the gas cap, further diagnosis and repair may be needed.
9. Can a DIY enthusiast repair OBDII code P043E in a 2019 Honda CR-V, or should it be left to professionals?
- Simple fixes like checking the gas cap can be done by DIY enthusiasts, but diagnosing and repairing complex issues related to code P043E may require professional assistance for accurate diagnosis and repair.
10. How much can I expect to pay for repairs related to OBDII code P043E in a 2019 Honda CR-V?
- The cost of repairs for code P043E can vary depending on the specific issue, but it is advisable to budget for diagnostic fees, parts replacement costs, and labor charges, which can range from a few hundred to over a thousand dollars.
Discuss the causes and fixes for P043E 2019 Honda CR-V OBDII Code
Code P043E 2019 Honda CR-V comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
