P043E 2018 Toyota RAV4 Code - Evaporative Emission System Leak Detection Reference Orifice Low Flow
Quick Answer
5 hours after the ignition switch is turned off, the leak detection pump creates negative pressure (vacuum) in the Evaporative Emission (EVAP) system. Common causes include Faulty Canister Pump Module, Canister Pump Module harness is open or shorted, Canister Pump Module circuit poor electrical connection. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
- What it means
- P043E 2018 Toyota RAV4 indicates Evaporative Emission System Leak Detection Reference Orifice Low Flow.
- Common causes
- Common causes include Faulty Canister Pump Module, Canister Pump Module harness is open or shorted, Canister Pump Module circuit poor electrical connection.
- Severity
- Low - monitor the vehicle and repair when practical.
- Can I drive?
- The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
Code P043E 2018 Toyota RAV4 Description
What are the Possible Causes of the DTC P043E 2018 Toyota RAV4?
- Faulty Canister Pump Module
- Canister Pump Module harness is open or shorted
- Canister Pump Module circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P043E 2018 Toyota RAV4?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P043E 2018 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P043E 2018 Toyota RAV4 code?
Need more information on how to fix the P043E 2018 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P043E 2018 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P043E 2018 Toyota RAV4 Code
What does the OBDII code P043E mean for a 2018 Toyota RAV4?
P043E indicates an issue with the Evaporative Emission (EVAP) System, specifically a low flow detected in the leak detection reference orifice, which may affect emissions performance.
What are common symptoms of the P043E code in a 2018 Toyota RAV4?
Typical symptoms include an illuminated check engine light, possible fuel odor near the vehicle, and reduced fuel efficiency, though there may be no noticeable drivability issues.
What causes the P043E code to appear on a 2018 Toyota RAV4?
Common causes include a clogged or damaged EVAP system reference orifice, a faulty leak detection pump, a damaged charcoal canister, or issues with vacuum lines and connections.
How can I diagnose the P043E code on a 2018 Toyota RAV4?
Diagnosis involves checking for leaks or blockages in the EVAP system, inspecting the leak detection pump and reference orifice, and using a smoke test to identify possible leaks.
Can I drive my 2018 Toyota RAV4 with the P043E code?
While the car is typically safe to drive, ignoring the P043E code can lead to increased emissions and may cause the vehicle to fail an emissions test.
How do I fix the P043E code on a 2018 Toyota RAV4?
Repairs may include cleaning or replacing the EVAP system reference orifice, repairing or replacing damaged vacuum lines, or replacing the leak detection pump if faulty.
How much does it cost to fix the P043E code on a 2018 Toyota RAV4?
Repair costs depend on the issue, ranging from $100 for minor repairs like vacuum line replacement to $500 or more for replacing the leak detection pump or charcoal canister.
Can a loose gas cap cause the P043E code on a 2018 Toyota RAV4?
A loose or faulty gas cap is unlikely to cause P043E but can trigger other EVAP-related codes. It’s still worth checking and tightening the gas cap as a first step.
Does the P043E code affect emissions testing for a 2018 Toyota RAV4?
Yes, the P043E code indicates an EVAP system issue, which can cause the vehicle to fail emissions testing until the problem is resolved.
How do I reset the P043E code on a 2018 Toyota RAV4?
After fixing the issue, the code can be cleared using an OBDII scanner, or it may clear itself after several drive cycles if the repair was successful.
Discuss the causes and fixes for P043E 2018 Toyota RAV4 OBDII Code
Code P043E 2018 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
