P043E 2013 Toyota RAV4 Code - Evaporative Emission System Leak Detection Reference Orifice Low Flow
Quick Answer
5 hours after the ignition switch is turned off, the leak detection pump creates negative pressure (vacuum) in the Evaporative Emission (EVAP) system. Common causes include Faulty Canister Pump Module, Canister Pump Module harness is open or shorted, Canister Pump Module circuit poor electrical connection. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
- What it means
- P043E 2013 Toyota RAV4 indicates Evaporative Emission System Leak Detection Reference Orifice Low Flow.
- Common causes
- Common causes include Faulty Canister Pump Module, Canister Pump Module harness is open or shorted, Canister Pump Module circuit poor electrical connection.
- Severity
- Low - monitor the vehicle and repair when practical.
- Can I drive?
- The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
Code P043E 2013 Toyota RAV4 Description
What are the Possible Causes of the DTC P043E 2013 Toyota RAV4?
- Faulty Canister Pump Module
- Canister Pump Module harness is open or shorted
- Canister Pump Module circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P043E 2013 Toyota RAV4?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P043E 2013 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P043E 2013 Toyota RAV4 code?
Need more information on how to fix the P043E 2013 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P043E 2013 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P043E 2013 Toyota RAV4 Code
1. What does OBDII code P043E mean for a 2013 Toyota RAV4?
P043E indicates an issue with the Evaporative Emission System Leak Detection Reference Orifice Low Flow, meaning the system isn't detecting the proper airflow through the reference orifice.
2. What are the common symptoms of code P043E in a 2013 Toyota RAV4?
Symptoms may include the Check Engine Light turning on, reduced fuel efficiency, and possible difficulty passing an emissions test.
3. What causes code P043E to appear in the 2013 Toyota RAV4?
Common causes include a clogged or faulty reference orifice, issues with the EVAP system vent valve, or damaged hoses and wiring in the EVAP system.
4. Can code P043E affect the performance of my 2013 Toyota RAV4?
It generally does not affect vehicle performance but may impact fuel efficiency and emissions compliance.
5. How is code P043E diagnosed in a 2013 Toyota RAV4?
A mechanic will typically use a scan tool to read the code, inspect the EVAP system components, and perform a smoke test to check for leaks or blockages.
6. What repairs can fix code P043E in a 2013 Toyota RAV4?
Repairs may include cleaning or replacing the reference orifice, repairing or replacing damaged EVAP system hoses, or replacing the vent valve.
7. Can I continue driving my 2013 Toyota RAV4 with code P043E?
You can drive with this code, but it’s best to address it promptly to avoid further damage and ensure emissions compliance.
8. How much does it cost to fix code P043E in a 2013 Toyota RAV4?
Repair costs vary but typically range from $100 to $300 depending on the specific issue and labor costs.
9. How can I prevent code P043E from occurring in my 2013 Toyota RAV4?
Regular maintenance of the EVAP system, including checking for damaged hoses and valves, can help prevent this code from appearing.
10. Is code P043E unique to Toyota vehicles?
No, P043E can appear in other vehicles equipped with OBDII systems, but repair steps and affected components may vary by manufacturer.
Discuss the causes and fixes for P043E 2013 Toyota RAV4 OBDII Code
Code P043E 2013 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
