AutoCodesAudi – P0414 Audi

P0414 Audi Code - Secondary Air Injection System Switching Valve 'A' Circuit Shorted

Quick Answer

An air pump is used on the vehicle to lower tail pipe emissions on start-up. Common causes include Faulty Air Pump inoperative, Air bypass solenoid harness is open or shorted, Air bypass solenoid circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means
P0414 Audi indicates Secondary Air Injection System Switching Valve 'A' Circuit Shorted.
Common causes
Common causes include Faulty Air Pump inoperative, Air bypass solenoid harness is open or shorted, Air bypass solenoid circuit poor electrical connection.
Severity
Moderate - service should be scheduled soon.
Can I drive?
The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 9,205
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Jun 14, 2020
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0414 Audi Description

An air pump is used on the vehicle to lower tail pipe emissions on start-up. The Powertrain Control Module (PCM) grounds the Air pump relay control circuit which energizes the Air pump. The PCM also grounds the Air combination valve vacuum control solenoid circuit, which energizes the Air vacuum control solenoid. Vacuum is then applied to both Air combination valve diaphragms which opens the shut off valves. The PCM enables both circuits simultaneously when Air system operations id desired. When the AIR system is active, then Air pump forces fresh air into the exhaust stream in order to accelerate catalyst operation. The AIR combination valves replace the conventional check valves. When the AIR system is inactive the shut off valves prevent air flow in either direction.
OBDII Code P0414 Audi - Secondary Air Injection System Switching Valve 'A' Circuit Shorted - AutoCodes.com
P0414 Audi Code - Secondary Air Injection System Switching Valve 'A' Circuit Shorted

What are the Possible Causes of the DTC P0414 Audi?

  • Faulty Air Pump inoperative
  • Air bypass solenoid harness is open or shorted
  • Air bypass solenoid circuit poor electrical connection

How to Fix the DTC P0414 Audi?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0414 Audi code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0414 Audi code?

Need more information on how to fix the P0414 Audi code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0414 Audi code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0414 Audi Code

What does OBDII code P0414 mean on an Audi?

Code P0414 indicates that the Secondary Air Injection System Switching Valve 'A' circuit has a short, meaning there is an electrical issue preventing the valve from functioning properly.

What are the symptoms of code P0414 in an Audi?

Common symptoms include an illuminated Check Engine Light, failed emissions tests, rough idling during a cold start, and reduced fuel efficiency.

What causes the P0414 code in an Audi?

The most common causes are a shorted or damaged switching valve, corroded or damaged wiring, a faulty air pump, or a malfunction in the ECU.

How do I diagnose code P0414 in an Audi?

Start by inspecting the wiring and connectors for damage or corrosion. Use a multimeter to test the switching valve's electrical circuit, and check for proper air pump operation.

Can I drive my Audi with code P0414?

While it may still be drivable, driving with P0414 can lead to increased emissions and potential damage to the secondary air injection system over time, so it’s best to address the issue promptly.

How do I fix code P0414 in an Audi?

Repairs include replacing the faulty switching valve, repairing or replacing damaged wiring, cleaning corroded connections, or addressing issues with the air pump or ECU as necessary.

How much does it cost to fix code P0414 on an Audi?

Repair costs vary but typically range from $100 to $500, depending on whether the issue is with the switching valve, wiring, or other components.

Can a bad ECU cause code P0414 on an Audi?

Yes, a malfunctioning ECU could potentially cause P0414 by failing to properly control the secondary air injection system.

What tools do I need to troubleshoot code P0414 in an Audi?

You’ll need an OBDII scanner, a multimeter for electrical testing, and basic tools for inspecting and repairing wiring or components.

Will clearing the code P0414 fix the problem?

Clearing the code may turn off the Check Engine Light temporarily, but it won’t resolve the underlying issue causing the code to appear.

Discuss the causes and fixes for P0414 Audi OBDII Code

Code P0414 Audi comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play