AutoCodes.com | All About OBDII Engine Codes
AutoCodes - Pontiac - P0411 Pontiac

P0411 Pontiac Code - Secondary Air Injection System Insufficient Flow

- Code Popularity: 10,508 Views
- Repair Importance Level: 2/3
- Repair Difficulty Level: 2/3
Table of contents
Share on Facebook   Share on Twitter   Share on Linkedin

What are the Possible Causes of the DTC P0411 Pontiac?

NOTE: The causes shown may not be a complete list of all potential problems, and it is possible that there may be other causes.
  • Vacuum hoses damaged or pinched
  • Faulty Air Pump inoperative
  • Faulty Air Pump harness is open or shorted
  • Faulty Air Pump circuit poor electrical connection
⚠ Does your Pontiac have Safety Recalls? → Check here

How to Fix the DTC P0411 Pontiac?

Review the 'Possible Causes' mentioned above and visually examine the corresponding wiring harness and connectors. Ensure to check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.

Search for P0411 Pontiac Questions and Answers: Search here →

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0411 Pontiac code, it typically requires 1.0 hour of labor. The specific diagnosis time and labor rates at auto repair shops can differ based on factors such as the location, make and model of the vehicle, and even the engine type. It is common for most auto repair shops to charge between $75 and $150 per hour.

When is the Code Detected?

The AIR system does not meet the expected flow rate during testing

What are Code Possible Symptoms?

  • Engine Light ON (or Service Engine Soon Warning Light)
  • Engine hesitation

Code P0411 Pontiac Description

The Secondary Air Injection (AIR) System aids in the reduction of hydrocarbon exhaust emissions during a cold start-up. This occurs when the start-up engine coolant temperature (ECT) is between 5-50°C (41-122°F), and the intake air temperature (IAT) is between 5-60°C (41-140°F). The AIR pump operates 5-60 seconds after start-up.
The Powertrain Control Module (PCM) activates the AIR system by simultaneously supplying grounds to the AIR pump and the AIR valve relays. This action closes the relays' internal contacts. The AIR pump and the AIR control solenoid valve/pressure sensor assembly are in turn energized, the pump runs and the control/shut-off valve opens.
The AIR pump sends pressurized fresh air into the pipes/hoses through the open control/shut-off valve, and into the exhaust manifold. The extra air accelerates the catalyst operation, helping it to reach operating temperature faster. The AIR pump remains ON for a short period of time after the control/shut-off valve is commanded OFF. When the AIR pump is commanded OFF it will not run or be activated until the next vehicle start. When the AIR system is inactive, the closed AIR control/shut-off valve prevents air/exhaust flow in either direction.
The AIR system pressure sensor is used to monitor pressure at the AIR control solenoid valve/pressure sensor assembly inlet during the commanded ON/OFF states.

OBDII Code P0411 Pontiac - Secondary Air Injection System Insufficient Flow - AutoCodes.com
P0411 Pontiac Code - Secondary Air Injection System Insufficient Flow

Need More Information on the Code?

Need more information on how to fix the P0411 Pontiac code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0411 Pontiac code diagnosed by a professional: Find a repair shop in your area

Code P0411 Pontiac comments

Help us improve AutoCodes.com. Leave a comment below or tell us if the information above helps you fix the code. What are the symptoms on your vehicle for the P0411 Pontiac code? Have you replaced any parts?
Any information is appreciated. Thanks