P0411 FORD - Secondary Air Injection System Downstream Flow
- Faulty Vacuum hoses damaged
- Faulty Air Pump inoperative
- Air bypass solenoid harness is open or shorted
- Air bypass solenoid circuit poor electrical connection
- Air bypass solenoid leaking/blocked or stuck open/closed
- Air diverter valve leaking/blocked or stuck open/closed
Tech notesThe secondary air injection system does not detect the presence of air in the exhaust when introduced by the secondary air injection system
When is the code detected?The secondary air injection system does not detect the presence of air in the exhaust when introduced by the secondary air injection system.
- Engine Light ON (or Service Engine Soon Warning Light)
- Engine hesitation
P0411 Ford DescriptionAn air pump is used on the vehicle to lower tail pipe emissions on start-up. The Powertrain Control Module (PCM) grounds the Air pump relay control circuit which energizes the Air pump. The PCM also grounds the Air combination valve vacuum control solenoid circuit, which energizes the Air vacuum control solenoid. Vacuum is then applied to both Air combination valve diaphragms which opens the shut off valves. The PCM enables both circuits simultaneously when Air system operations id desired. When the AIR system is active, then Air pump forces fresh air into the exhaust stream in order to accelerate catalyst operation. The AIR combination valves replace the conventional check valves. When the AIR system is inactive the shut off valves prevent air flow in either direction.
P0411 Ford Information for specific Ford models
Need more help?Get the P0411 Ford code diagnosed by a professional: Find a repair shop in your area
P0411 FORD CommentsHelp us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the P0411 Ford code? Have you replaced any parts?
Any information is appreciated. Thanks