AutoCodes - Oldsmobile - P0410 OLDSMOBILE

P0410 OLDSMOBILE Code - Secondary Air Injection System Malfunction

Repair Importance Level: 2/3
Repair Difficulty Level: 2/3
Table of contents

|P0410 OLDSMOBILE code possible causes

  • Faulty Vacuum hoses damaged
  • Faulty Air Pump inoperative
  • Air bypass solenoid harness is open or shorted
  • Air bypass solenoid circuit poor electrical connection
  • Air bypass solenoid leaking/blocked or stuck open/closed
  • Air diverter valve leaking/blocked or stuck open/closed

|How do I fix the P0410 OLDSMOBILE code?

Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.

|P0410 OLDSMOBILE code tech notes

Visually inspect the AIR pump and AIR bypass valve harness and connector, if the connector is OK, then replaced the AIR bypass valve.

There is a factory service bulletin for the 1999-2001 Oldsmobile Bravada:
1999-2001 Oldsmobile Bravada Factory Service Bulletin OBDII Code P0410

|Cost of diagnosing the P0410 OLDSMOBILE code

Labor: 1.0

The cost of diagnosing the P0410 OLDSMOBILE code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.

|When is the P0410 OLDSMOBILE code detected?

The secondary air injection system does not detect the presence of air in the exhaust when introduced by the secondary air injection system.

|What are P0410 OLDSMOBILE code possible symptoms?

  • Engine Light ON (or Service Engine Soon Warning Light)
  • Engine hesitation

|P0410 OLDSMOBILE code description

An air pump is used on the vehicle to lower tail pipe emissions on start-up. The Powertrain Control Module (PCM) grounds the Air pump relay control circuit which energizes the Air pump. The PCM also grounds the Air combination valve vacuum control solenoid circuit, which energizes the Air vacuum control solenoid. Vacuum is then applied to both Air combination valve diaphragms which opens the shut off valves. The PCM enables both circuits simultaneously when Air system operations id desired. When the AIR system is active, then Air pump forces fresh air into the exhaust stream in order to accelerate catalyst operation. The AIR combination valves replace the conventional check valves. When the AIR system is inactive the shut off valves prevent air flow in either direction.
OBDII Code P0410 Oldsmobile - Secondary Air Injection System Malfunction - AutoCodes.com

|Need more information with the P0410 OLDSMOBILE code?

Need more information on how to fix the P0410 OLDSMOBILE code? Get Access to Factory Service Manuals

|Need help with a P0410 OLDSMOBILE code?

Get the P0410 Oldsmobile code diagnosed by a professional: Find a repair shop in your area

|P0410 OLDSMOBILE code comments

Help us improve AutoCodes.com. Leave a comment below or tell us if the information above helps you fix the code. What are the symptoms on your vehicle for the P0410 Oldsmobile code? Have you replaced any parts?
Any information is appreciated. Thanks
Top ⇧
Repair Importance Level: 2
 
1=Low 2=Medium 3=High What is this?
Repair Difficulty Level: 2
 
1=Easy 2=Moderate 3=Hard What is this?