AutoCodes.com
Login with Google
AutoCodes – Chrysler – P0410 Chrysler

P0410 Chrysler Code - Secondary Air Injection System Malfunction

Quick Answer

An air pump is used on the vehicle to lower tail pipe emissions on start-up. Common causes include Faulty Vacuum hoses damaged, Faulty Air Pump inoperative, Air bypass solenoid harness is open or shorted. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means
P0410 Chrysler indicates Secondary Air Injection System Malfunction.
Common causes
Common causes include Faulty Vacuum hoses damaged, Faulty Air Pump inoperative, Air bypass solenoid harness is open or shorted.
Severity
Moderate - service should be scheduled soon.
Can I drive?
The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Save to My Repairs Step-by-Step Diagnostic Guide My Repairs
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 10,073
How popular is this code, among other codes? Low
What is this?
Table of contents Created and updated by William Orellana on Apr 18, 2019
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0410 Chrysler Description

An air pump is used on the vehicle to lower tail pipe emissions on start-up. The Powertrain Control Module (PCM) grounds the Air pump relay control circuit which energizes the Air pump. The PCM also grounds the Air combination valve vacuum control solenoid circuit, which energizes the Air vacuum control solenoid. Vacuum is then applied to both Air combination valve diaphragms which opens the shut off valves. The PCM enables both circuits simultaneously when Air system operations id desired. When the AIR system is active, then Air pump forces fresh air into the exhaust stream in order to accelerate catalyst operation. The AIR combination valves replace the conventional check valves. When the AIR system is inactive the shut off valves prevent air flow in either direction.
OBDII Code P0410 Chrysler - Secondary Air Injection System Malfunction - AutoCodes.com
P0410 Chrysler Code - Secondary Air Injection System Malfunction
What does this mean?

What are the Possible Causes of the DTC P0410 Chrysler?

  • Faulty Vacuum hoses damaged
  • Faulty Air Pump inoperative
  • Air bypass solenoid harness is open or shorted
  • Air bypass solenoid circuit poor electrical connection
  • Air bypass solenoid leaking/blocked or stuck open/closed
  • Air diverter valve leaking/blocked or stuck open/closed

How to Fix the DTC P0410 Chrysler?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0410 Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0410 Chrysler code?

Need more information on how to fix the P0410 Chrysler code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0410 Chrysler code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0410 Chrysler Code

No Frequently Asked Questions about P0410 Chrysler Code found.

Discuss the causes and fixes for P0410 Chrysler OBDII Code

Submit a New Comment
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play