P0406 2007 Ford Fusion Code - Exhaust Gas Recirculation Sensor 'A' Circuit High
Quick Answer
The EGR monitor checks the EGR sensor signal to the Powertrain Control Module (PCM) for high voltage. Common causes include Faulty EGR volume control solenoid valve, Carbon built up on EGR valve, EGR volume control solenoid valve harness is open or shorted. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P0406 2007 Ford Fusion indicates Exhaust Gas Recirculation Sensor 'A' Circuit High.
- Common causes
- Common causes include Faulty EGR volume control solenoid valve, Carbon built up on EGR valve, EGR volume control solenoid valve harness is open or shorted.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Code P0406 2007 Ford Fusion Description
What are the Possible Causes of the DTC P0406 2007 Ford Fusion?
- Faulty EGR volume control solenoid valve
- Carbon built up on EGR valve
- EGR volume control solenoid valve harness is open or shorted
- EGR volume control solenoid valve circuit poor electrical connection
- Faulty EGR temperature sensor and circuit
How to Fix the DTC P0406 2007 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0406 2007 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0406 2007 Ford Fusion code?
Need more information on how to fix the P0406 2007 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0406 2007 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0406 2007 Ford Fusion Code
1. What are the common symptoms of OBDII code P0406 on a 2007 Ford Fusion?
The common symptoms of code P0406 on a 2007 Ford Fusion include poor engine performance, reduced fuel efficiency, rough idling, and the illumination of the Check Engine light.
2. What does the OBDII code P0406 'Exhaust Gas Recirculation Sensor A Circuit High' mean?
The code P0406 indicates that there is a high voltage condition detected in the Exhaust Gas Recirculation (EGR) sensor A circuit of the vehicle.
3. What are the possible causes of OBDII code P0406 on a 2007 Ford Fusion?
Possible causes of code P0406 on a 2007 Ford Fusion include a faulty EGR sensor, damaged wiring or connectors in the EGR system, a clogged EGR valve, or issues with the EGR valve position sensor.
4. How can I diagnose the OBDII code P0406 on my 2007 Ford Fusion?
Diagnosing code P0406 involves using a scan tool to retrieve the specific fault code, checking the EGR system components for any visible damage or blockages, and testing the EGR sensor and related wiring for proper voltage and continuity.
5. Can I still drive my 2007 Ford Fusion with OBDII code P0406?
While it may be possible to drive the vehicle with code P0406, it is not recommended as it can lead to further damage to the engine and emissions system. It is best to address the issue promptly.
6. How can I repair OBDII code P0406 on a 2007 Ford Fusion?
To repair code P0406, you may need to replace the EGR sensor, repair any damaged wiring or connectors, clean or replace the EGR valve if necessary, and clear the fault codes using a scan tool.
7. Is it safe to reset the Check Engine light after fixing OBDII code P0406?
Once you have addressed the underlying issue causing code P0406, it is safe to reset the Check Engine light using a scan tool. This will ensure that the light does not come back on if the problem has been resolved.
8. How much does it typically cost to fix OBDII code P0406 on a 2007 Ford Fusion?
The cost of fixing code P0406 on a 2007 Ford Fusion can vary depending on the specific repairs needed. It may range from a few hundred dollars for parts and labor if it involves sensor replacement, to more if additional components need attention.
9. Can a DIY enthusiast repair OBDII code P0406 on a 2007 Ford Fusion?
While some aspects of diagnosing and repairing code P0406 can be done by a DIY enthusiast, it is recommended to have a professional mechanic handle the repair due to the complexity of the EGR system and potential for further damage if not addressed correctly.
10. How often does OBDII code P0406 occur in a 2007 Ford Fusion?
Code P0406 can occur sporadically in a 2007 Ford Fusion due to issues with the EGR system, sensor, or related components. Regular maintenance and inspection of the EGR system can help prevent the recurrence of this code.
Discuss the causes and fixes for P0406 2007 Ford Fusion OBDII Code
Code P0406 2007 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
