P0406 1997 Ford F150 Code - Exhaust Gas Recirculation Sensor 'A' Circuit High
Quick Answer
Early Exhaust Gas Recirculation (EGR) systems component s include and EGR Valve, and Engine Control Μodule (ECΜ) Controlled Vacuum Switch Valve or EGR Solenoid and an EGR Vacuum Μodulator. Common causes include Faulty EGR volume control solenoid valve, Carbon built up on EGR valve, EGR volume control solenoid valve harness is open or shorted. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P0406 1997 Ford F150 indicates Exhaust Gas Recirculation Sensor 'A' Circuit High.
- Common causes
- Common causes include Faulty EGR volume control solenoid valve, Carbon built up on EGR valve, EGR volume control solenoid valve harness is open or shorted.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Code P0406 1997 Ford F150 Description
The EGR system on recently built vehicles uses a step motor to control the flow rate of EGR from exhaust manifold. This motor has four winding phases. It operates according to the output pulse signal of the ECΜ. Two windings are turned ON and OFF in sequence. Each time an ON pulse is issued, the valve opens or closes, changing the flow rate. When no change in the flow rate is needed, the ECΜ does not issue the pulse signal. Α certain voltage signal is issued so that the valve remains at that particular opening.
What are the Possible Causes of the DTC P0406 1997 Ford F150?
- Faulty EGR volume control solenoid valve
- Carbon built up on EGR valve
- EGR volume control solenoid valve harness is open or shorted
- EGR volume control solenoid valve circuit poor electrical connection
- Faulty EGR temperature sensor and circuit
How to Fix the DTC P0406 1997 Ford F150?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0406 1997 Ford F150 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0406 1997 Ford F150 code?
Need more information on how to fix the P0406 1997 Ford F150 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0406 1997 Ford F150 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0406 1997 Ford F150 Code
1. What are the common symptoms of OBDII code P0406 on a 1997 Ford F150?
- Common symptoms include the check engine light coming on, rough idling, decreased fuel efficiency, and potential engine stalling.
2. What does the OBDII code P0406 on a 1997 Ford F150 indicate?
- This code indicates an issue with the Exhaust Gas Recirculation (EGR) sensor 'A' circuit registering a high voltage.
3. What are the possible causes of OBDII code P0406 on a 1997 Ford F150?
- Possible causes include a faulty EGR sensor, damaged wiring or connectors in the EGR system, carbon buildup in the EGR valve, or issues with the vehicle's ECM.
4. How can I diagnose the cause of OBDII code P0406 on my 1997 Ford F150?
- Diagnosis typically involves checking the EGR sensor and its connections, inspecting the wiring for any damage, cleaning the EGR valve, and using a scan tool to monitor sensor readings.
5. Can I continue driving my 1997 Ford F150 with OBDII code P0406?
- It is not recommended to drive with this code unresolved, as it can lead to engine performance issues and potentially cause further damage over time.
6. How can I repair OBDII code P0406 on a 1997 Ford F150?
- Repair options may include replacing the EGR sensor, repairing damaged wiring or connectors, cleaning or replacing the EGR valve, or resetting the ECM after addressing the issue.
7. Is it possible to reset the OBDII code P0406 on a 1997 Ford F150 without fixing the underlying issue?
- While clearing the code temporarily may be possible, it will likely reappear until the root cause is addressed, so it is recommended to fix the issue first.
8. How much does it typically cost to repair OBDII code P0406 on a 1997 Ford F150?
- The cost can vary depending on the specific cause of the code, but it may range from $100 to $300 for parts and labor if a sensor replacement or simple repair is needed.
9. Can a DIY enthusiast fix OBDII code P0406 on a 1997 Ford F150?
- Depending on the level of mechanical knowledge and tools available, DIY enthusiasts may be able to address the issue by following repair guides or tutorials specific to the EGR system.
10. Will OBDII code P0406 cause my 1997 Ford F150 to fail an emissions test?
- Yes, this code can cause your vehicle to fail an emissions test due to the malfunction in the EGR system affecting exhaust gas recirculation and emission levels.
Discuss the causes and fixes for P0406 1997 Ford F150 OBDII Code
Code P0406 1997 Ford F150 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
