AutoCodesChevrolet – P0405 2014 Chevrolet Silverado

P0405 2014 Chevrolet Silverado Code - Exhaust Gas Recirculation Position Sensor Circuit Low Voltage

Quick Answer

The Engine Control Module (ECM) uses the Exhaust Gas Recirculation (EGR) position sensor to determine the position of the EGR valve. Common causes include Faulty Exhaust Gas Recirculation (EGR) Valve, Exhaust Gas Recirculation Valve harness is open or shorted, Exhaust Gas Recirculation Valve circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means
P0405 2014 Chevrolet Silverado indicates Exhaust Gas Recirculation Position Sensor Circuit Low Voltage.
Common causes
Common causes include Faulty Exhaust Gas Recirculation (EGR) Valve, Exhaust Gas Recirculation Valve harness is open or shorted, Exhaust Gas Recirculation Valve circuit poor electrical connection.
Severity
Moderate - service should be scheduled soon.
Can I drive?
The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 386
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Jun 20, 2022
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0405 2014 Chevrolet Silverado Description

The Engine Control Module (ECM) uses the Exhaust Gas Recirculation (EGR) position sensor to determine the position of the EGR valve. The ECM sends a reference voltage through the 5 V reference circuit to the EGR position sensor. The ECM provides a voltage return path for the sensor through the low reference circuit. A variable voltage signal, based on the EGR valve position, is sent from the sensor to the ECM through the EGR position sensor signal circuit. The Diagnostic Trouble Code (DTC) will be set when the ECM detects that the EGR position sensor voltage is less than 0.25 V for greater than 5 s.
OBDII Code P0405 2014 Chevrolet Silverado - Exhaust Gas Recirculation Position Sensor Circuit Low Voltage - AutoCodes.com
P0405 2014 Chevrolet Silverado Code - Exhaust Gas Recirculation Position Sensor Circuit Low Voltage

What are the Possible Causes of the DTC P0405 2014 Chevrolet Silverado?

  • Faulty Exhaust Gas Recirculation (EGR) Valve
  • Exhaust Gas Recirculation Valve harness is open or shorted
  • Exhaust Gas Recirculation Valve circuit poor electrical connection
  • Faulty Engine Control Module (ECM)

How to Fix the DTC P0405 2014 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0405 2014 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0405 2014 Chevrolet Silverado code?

Need more information on how to fix the P0405 2014 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0405 2014 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0405 2014 Chevrolet Silverado Code

What does OBDII code P0405 mean for a 2014 Chevrolet Silverado?

Code P0405 indicates a problem with the Exhaust Gas Recirculation (EGR) Position Sensor Circuit, specifically low voltage readings detected by the powertrain control module (PCM).

What are common symptoms of code P0405 in a 2014 Chevrolet Silverado?

Symptoms may include a check engine light, rough idle, reduced engine performance, increased emissions, and possible stalling.

What causes code P0405 on a 2014 Chevrolet Silverado?

Common causes include a faulty EGR position sensor, damaged wiring or connectors, issues with the EGR valve, or a problem with the PCM.

Can I drive my 2014 Chevrolet Silverado with code P0405?

While the vehicle may still be driveable, ignoring the code can cause poor engine performance, increased emissions, and potential damage to other components.

How do I fix code P0405 on a 2014 Chevrolet Silverado?

Repairs may involve replacing the EGR position sensor, repairing or replacing damaged wiring, cleaning the EGR valve, or updating the PCM software if necessary.

How can I test the EGR position sensor for code P0405?

You can use a multimeter to check the sensor’s voltage output or use an OBDII scanner to monitor live data from the sensor.

Is code P0405 related to emissions problems?

Yes, a malfunctioning EGR system can increase harmful emissions and potentially cause the vehicle to fail an emissions test.

What is the cost to repair code P0405 on a 2014 Chevrolet Silverado?

Repair costs may range from $100 to $400 depending on whether you replace the EGR position sensor, repair wiring, or clean the EGR valve.

Can a dirty EGR valve cause code P0405?

Yes, carbon buildup in the EGR valve can obstruct proper operation and affect the position sensor, leading to low voltage readings.

Will a faulty EGR position sensor affect fuel economy?

Yes, a faulty sensor can disrupt the EGR system’s operation, potentially reducing fuel efficiency and engine performance.

Discuss the causes and fixes for P0405 2014 Chevrolet Silverado OBDII Code

Code P0405 2014 Chevrolet Silverado comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play