P0404 Acura Code - Exhaust Gas Recirculation Valve Circuit Range/Performance
Quick Answer
Early Exhaust Gas Recirculation (EGR) systems component s include and EGR Valve, and Engine Control Μodule (ECΜ) Controlled Vacuum Switch Valve or EGR Solenoid and an EGR Vacuum Μodulator. Common causes include EGR volume control solenoid valve, EGR volume control solenoid valve harness is open or shorted, EGR volume control solenoid valve circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P0404 Acura indicates Exhaust Gas Recirculation Valve Circuit Range/Performance.
- Common causes
- Common causes include EGR volume control solenoid valve, EGR volume control solenoid valve harness is open or shorted, EGR volume control solenoid valve circuit poor electrical connection.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Code P0404 Acura Description
The EGR system on recently built vehicles uses a step motor to control the flow rate of EGR from exhaust manifold. This motor has four winding phases. It operates according to the output pulse signal of the ECΜ. Two windings are turned ON and OFF in sequence. Each time an ON pulse is issued, the valve opens or closes, changing the flow rate. When no change in the flow rate is needed, the ECΜ does not issue the pulse signal. Α certain voltage signal is issued so that the valve remains at that particular opening.
What are the Possible Causes of the DTC P0404 Acura?
- EGR volume control solenoid valve
- EGR volume control solenoid valve harness is open or shorted
- EGR volume control solenoid valve circuit poor electrical connection
- EGR temperature sensor and circuit
How to Fix the DTC P0404 Acura?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0404 Acura code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0404 Acura code?
Need more information on how to fix the P0404 Acura code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0404 Acura code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0404 Acura Code
1. What are the common symptoms of OBDII code P0404 in an Acura?
The common symptoms of code P0404 in an Acura include rough idling, engine stalling, decreased fuel efficiency, and the illumination of the Check Engine Light.
2. What are the possible causes of OBDII code P0404 in an Acura?
The possible causes of code P0404 in an Acura are a faulty Exhaust Gas Recirculation (EGR) valve, clogged EGR passages, wiring issues, or a malfunctioning EGR position sensor.
3. How can I diagnose OBDII code P0404 in my Acura?
To diagnose code P0404, you can use an OBDII scanner to read the code and then perform a visual inspection of the EGR valve and its components. Additionally, testing the EGR valve and sensor using a multimeter can help pinpoint the issue.
4. Can I continue driving my Acura with OBDII code P0404 active?
It is not recommended to drive your Acura with an active P0404 code, as it can lead to poor engine performance and potential damage over time. It is best to address the issue promptly.
5. How can I repair OBDII code P0404 in my Acura?
Repairing code P0404 in an Acura may involve cleaning or replacing the EGR valve, clearing any clogged passages, checking and repairing wiring connections, or replacing the EGR position sensor if necessary.
6. Will resetting the Check Engine Light fix OBDII code P0404 in my Acura?
Resetting the Check Engine Light may temporarily turn off the warning indicator, but it will not fix the underlying issue causing code P0404. It is essential to diagnose and repair the problem to prevent further issues.
7. Can a dirty air filter trigger OBDII code P0404 in an Acura?
While a dirty air filter may affect engine performance, it is not a direct cause of code P0404. Focus on inspecting the EGR system components for issues related to this specific code.
8. How long does it typically take to repair OBDII code P0404 in an Acura?
The repair time for code P0404 in an Acura can vary depending on the exact cause of the issue. Simple fixes like cleaning EGR components may take less than an hour, while more complex repairs could require a few hours.
9. Is it possible to prevent OBDII code P0404 from occurring in my Acura?
Regular maintenance, including cleaning the EGR system components and ensuring proper engine performance, can help prevent code P0404 in your Acura. Promptly addressing any issues related to engine performance can also aid in prevention.
10. Will code P0404 affect the emissions performance of my Acura?
Yes, code P0404 can negatively impact the emissions performance of your Acura. Addressing the issue promptly is crucial to maintaining optimal emissions levels and overall engine efficiency.
Discuss the causes and fixes for P0404 Acura OBDII Code
Code P0404 Acura comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
