AutoCodes – Chevrolet – P0403 2014 Chevrolet Silverado

P0403 2014 Chevrolet Silverado Code - Exhaust Gas Recirculation Control Circuit

Quick Answer

The Engine Control Module (ECM) supplies the Exhaust Gas Recirculation (EGR) valve with a 5 V reference circuit, a low reference circuit, an H-bridge motor directional control circuit, and a signal circuit. Common causes include Faulty Exhaust Gas Recirculation (EGR) Valve, Exhaust Gas Recirculation Valve harness is open or shorted, Exhaust Gas Recirculation Valve circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means: P0403 2014 Chevrolet Silverado indicates Exhaust Gas Recirculation Control Circuit.
Common causes: Common causes include Faulty Exhaust Gas Recirculation (EGR) Valve, Exhaust Gas Recirculation Valve harness is open or shorted, Exhaust Gas Recirculation Valve circuit poor electrical connection.
Severity: Moderate - service should be scheduled soon.
Can I drive?: The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 540

How popular is this code, among other codes? Low

Repair Importance Level

Moderate (Service soon) (2 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 19, 2022

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Cost to Diagnose
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0403 2014 Chevrolet Silverado Description

The Engine Control Module (ECM) supplies the Exhaust Gas Recirculation (EGR) valve with a 5 V reference circuit, a low reference circuit, an H-bridge motor directional control circuit, and a signal circuit. The EGR position sensor provides a signal voltage that changes relative to the EGR position. The EGR position sensor information is transmitted between the EGR valve and the ECM on the signal circuit. The Mass Air Flow (MAF) sensor signal is used by the ECM to detect the proper amount of EGR flow. The ECM will close the EGR valve, then open the EGR valve to 100%. The ECM will then calculate the MAF difference and determine if the proper EGR flow has been detected. The Diagnostic Trouble Code (DTC) will be set when the ECM detects an open on the control circuit for greater than 2.5 s.

OBDII Code P0403 2014 Chevrolet Silverado - Exhaust Gas Recirculation Control Circuit - AutoCodes.com — P0403 2014 Chevrolet Silverado Code - Exhaust Gas Recirculation Control Circuit

What does this mean?

What are the Possible Causes of the DTC P0403 2014 Chevrolet Silverado?

Faulty Exhaust Gas Recirculation (EGR) Valve
Exhaust Gas Recirculation Valve harness is open or shorted
Exhaust Gas Recirculation Valve circuit poor electrical connection
Faulty Engine Control Module (ECM)

How to Fix the DTC P0403 2014 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0403 2014 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0403 2014 Chevrolet Silverado code?

Need more information on how to fix the P0403 2014 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0403 2014 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.