P0403 2007 Ford Fusion Code - Exhaust Gas Recirculation Control Circuit
Quick Answer
The EEGR system is continuously monitored to check the four EEGR motor coils, circuits, and the Powertrain Control Module (PCM) for opens, shorts to voltage and ground. Common causes include Faulty EGR volume control solenoid valve, EGR volume control solenoid valve harness is open or shorted, EGR volume control solenoid valve circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P0403 2007 Ford Fusion indicates Exhaust Gas Recirculation Control Circuit .
- Common causes
- Common causes include Faulty EGR volume control solenoid valve, EGR volume control solenoid valve harness is open or shorted, EGR volume control solenoid valve circuit poor electrical connection.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Code P0403 2007 Ford Fusion Description
What are the Possible Causes of the DTC P0403 2007 Ford Fusion?
- Faulty EGR volume control solenoid valve
- EGR volume control solenoid valve harness is open or shorted
- EGR volume control solenoid valve circuit poor electrical connection
- EGR temperature sensor and circuit
How to Fix the DTC P0403 2007 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0403 2007 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0403 2007 Ford Fusion code?
Need more information on how to fix the P0403 2007 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0403 2007 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0403 2007 Ford Fusion Code
1. What are the common symptoms of OBDII code P0403 in a 2007 Ford Fusion?
- Common symptoms include check engine light illumination, rough idling, decreased fuel efficiency, and potential engine hesitation.
2. What does OBDII code P0403 for the Exhaust Gas Recirculation (EGR) Control Circuit indicate in a 2007 Ford Fusion?
- This code indicates a malfunction in the EGR control circuit, typically caused by issues with the EGR valve position sensor or the wiring associated with the EGR system.
3. What are the possible causes of OBDII code P0403 in a 2007 Ford Fusion?
- Possible causes include a faulty EGR valve, malfunctioning EGR valve position sensor, damaged wiring in the EGR circuit, or a problem with the PCM (Powertrain Control Module).
4. How can I diagnose the OBDII code P0403 in my 2007 Ford Fusion?
- Diagnosing this code involves inspecting the EGR valve and sensor, checking the wiring for any damage or loose connections, and using a scan tool to retrieve specific data related to the EGR system.
5. Can I drive my 2007 Ford Fusion with OBDII code P0403?
- It is not recommended to drive the vehicle extensively with this code as it can lead to reduced engine performance and potential damage if left unresolved for an extended period.
6. How can I repair OBDII code P0403 on my 2007 Ford Fusion?
- Repair typically involves replacing the EGR valve or sensor if faulty, repairing any damaged wiring, and clearing the code with a scan tool after the issue has been addressed.
7. Is it possible to prevent OBDII code P0403 from occurring in my 2007 Ford Fusion?
- Regular maintenance of the EGR system, such as cleaning the EGR valve and checking for any signs of wear, can help prevent issues that may trigger this code.
8. Can a DIY enthusiast fix OBDII code P0403 in a 2007 Ford Fusion?
- Depending on their skill level and access to tools, a DIY enthusiast may be able to address this code by following repair guides specific to the EGR system in the Ford Fusion.
9. How much does it typically cost to repair OBDII code P0403 on a 2007 Ford Fusion?
- The cost of repair can vary depending on the specific cause of the code, but it may range from $100 to $500 for parts and labor, with costs potentially higher if additional components need replacement.
10. Will OBDII code P0403 cause emissions test failure in my 2007 Ford Fusion?
- Yes, this code can cause your vehicle to fail emissions testing due to the malfunction in the EGR control circuit, which is designed to reduce emissions from the engine.
Discuss the causes and fixes for P0403 2007 Ford Fusion OBDII Code
Code P0403 2007 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
