P0403 2006 Ford Fusion Code - Exhaust Gas Recirculation Control Circuit
Quick Answer
The EEGR system is continuously monitored to check the four EEGR motor coils, circuits, and the Powertrain Control Module (PCM) for opens, shorts to voltage and ground. Common causes include Faulty EGR volume control solenoid valve, EGR volume control solenoid valve harness is open or shorted, EGR volume control solenoid valve circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P0403 2006 Ford Fusion indicates Exhaust Gas Recirculation Control Circuit .
- Common causes
- Common causes include Faulty EGR volume control solenoid valve, EGR volume control solenoid valve harness is open or shorted, EGR volume control solenoid valve circuit poor electrical connection.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Code P0403 2006 Ford Fusion Description
What are the Possible Causes of the DTC P0403 2006 Ford Fusion?
- Faulty EGR volume control solenoid valve
- EGR volume control solenoid valve harness is open or shorted
- EGR volume control solenoid valve circuit poor electrical connection
- EGR temperature sensor and circuit
How to Fix the DTC P0403 2006 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0403 2006 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0403 2006 Ford Fusion code?
Need more information on how to fix the P0403 2006 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0403 2006 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0403 2006 Ford Fusion Code
1. What does the OBDII code P0403 mean on a 2006 Ford Fusion?
P0403 indicates a malfunction in the Exhaust Gas Recirculation (EGR) control circuit, meaning the EGR system is not operating correctly.
2. What are the common symptoms of code P0403 on a 2006 Ford Fusion?
Symptoms may include the Check Engine Light turning on, poor engine performance, rough idling, increased fuel consumption, and sometimes engine knocking.
3. What causes the P0403 code on a 2006 Ford Fusion?
Common causes include a faulty EGR valve, damaged EGR solenoid, corroded or broken wiring in the EGR circuit, or a problem with the vehicle’s PCM (Powertrain Control Module).
4. Can I drive my 2006 Ford Fusion with a P0403 code?
While the car may still be drivable, driving with a P0403 code can lead to increased emissions, reduced fuel efficiency, and potential long-term engine damage if not addressed.
5. How do I diagnose the P0403 code on my 2006 Ford Fusion?
Start by checking the EGR valve and solenoid for proper operation, inspect the wiring and connectors for damage or corrosion, and use a scan tool to test the EGR control circuit.
6. How can I fix the P0403 code on a 2006 Ford Fusion?
Repairs may include replacing the EGR valve or solenoid, cleaning clogged EGR passages, repairing damaged wiring, or reprogramming or replacing the PCM if necessary.
7. How much does it cost to repair the P0403 code on a 2006 Ford Fusion?
The cost will vary depending on the issue. Replacing an EGR valve typically ranges from $150 to $400, while wiring repairs or PCM replacement can cost more.
8. Can a dirty EGR valve cause the P0403 code on a 2006 Ford Fusion?
Yes, a dirty or clogged EGR valve can restrict proper operation and lead to the P0403 code.
9. Will clearing the P0403 code fix the problem on a 2006 Ford Fusion?
Clearing the code will reset the Check Engine Light temporarily, but the underlying issue must be fixed to prevent the code from returning.
10. Can a bad PCM cause the P0403 code on a 2006 Ford Fusion?
Although rare, a faulty PCM can cause the P0403 code if it fails to properly control the EGR circuit.
Discuss the causes and fixes for P0403 2006 Ford Fusion OBDII Code
Code P0403 2006 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
