AutoCodes – Chevrolet – P0402 2016 Chevrolet Silverado

P0402 2016 Chevrolet Silverado Code - Exhaust Gas Recirculation Flow Excessive

Quick Answer

The Exhaust Gas Recirculation (EGR) valve is controlled by the Engine Control Module (ECM). Common causes include Faulty Exhaust Gas Recirculation (EGR) Valve, EGR solenoid valve harness is open or shorted, EGR solenoid valve circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means
P0402 2016 Chevrolet Silverado indicates Exhaust Gas Recirculation Flow Excessive.
Common causes
Common causes include Faulty Exhaust Gas Recirculation (EGR) Valve, EGR solenoid valve harness is open or shorted, EGR solenoid valve circuit poor electrical connection.
Severity
Moderate - service should be scheduled soon.
Can I drive?
The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 310
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Jun 19, 2022
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P0402 2016 Chevrolet Silverado Description

The Exhaust Gas Recirculation (EGR) valve is controlled by the Engine Control Module (ECM). The ECM controls the EGR valve by supplying a 12-volt pulse width modulated signal to the EGR Valve low control circuit and 12 volts to the high control circuit. The ECM monitors the EGR flow performance when the EGR is active by comparing the desired Mass Air Flow (MAF) to the actual MAF. If the difference between the desired MAF and the actual MAF is less than or greater than a calibrated threshold level the amount of detected EGR flow is out of range. The Diagnostic Trouble Code (DTC) will be set when the ECM detects that the difference between the desired mass air flow and the actual mass air flow is less than a calibrated value for greater than 12.5 s.
OBDII Code P0402 2016 Chevrolet Silverado - Exhaust Gas Recirculation Flow Excessive - AutoCodes.com
P0402 2016 Chevrolet Silverado Code - Exhaust Gas Recirculation Flow Excessive

What are the Possible Causes of the DTC P0402 2016 Chevrolet Silverado?

  • Faulty Exhaust Gas Recirculation (EGR) Valve
  • EGR solenoid valve harness is open or shorted
  • EGR solenoid valve circuit poor electrical connection

How to Fix the DTC P0402 2016 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0402 2016 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0402 2016 Chevrolet Silverado code?

Need more information on how to fix the P0402 2016 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0402 2016 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0402 2016 Chevrolet Silverado Code

What does the OBDII code P0402 mean for a 2016 Chevrolet Silverado?

P0402 indicates that the Exhaust Gas Recirculation (EGR) system is allowing excessive flow, which may disrupt engine performance.

What are the common symptoms of code P0402 on a 2016 Chevrolet Silverado?

Symptoms may include rough idling, decreased fuel efficiency, engine hesitation, or the check engine light turning on.

What causes the P0402 code on a 2016 Chevrolet Silverado?

Common causes include a stuck-open EGR valve, carbon buildup in the EGR system, a faulty EGR sensor, or issues with the EGR passages.

Can driving with code P0402 damage my 2016 Chevrolet Silverado?

Driving for an extended period with this code can lead to reduced engine efficiency and potential damage to internal components due to excess heat or improper combustion.

How can I diagnose the P0402 code on my 2016 Chevrolet Silverado?

Start by inspecting the EGR valve for carbon buildup or damage, check the EGR sensor readings, and use a scanner to monitor live data for irregularities in flow.

How do I fix the P0402 code on a 2016 Chevrolet Silverado?

Repairs may involve cleaning or replacing the EGR valve, clearing carbon buildup in the EGR system, or replacing faulty sensors.

What tools are needed to fix the P0402 code on a 2016 Chevrolet Silverado?

You may need a diagnostic scanner, basic hand tools, EGR cleaner, and possibly replacement parts such as an EGR valve or sensor.

Is cleaning the EGR valve a reliable solution for code P0402?

Yes, cleaning the EGR valve can often resolve the issue if carbon buildup is causing the excessive flow.

How much does it cost to repair the P0402 code on a 2016 Chevrolet Silverado?

Repair costs can range from $150 to $500, depending on whether cleaning or part replacement is required.

Can a faulty EGR sensor trigger the P0402 code on a 2016 Chevrolet Silverado?

Yes, a malfunctioning EGR sensor can send incorrect data to the ECU, leading to excessive EGR flow and triggering the code.

Discuss the causes and fixes for P0402 2016 Chevrolet Silverado OBDII Code

Code P0402 2016 Chevrolet Silverado comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play