P0400 Infiniti Code - Exhaust Gas Recirculation Function- No/Low Flow Detected
Quick Answer
Early Exhaust Gas Recirculation (EGR) systems component s include and EGR Valve, and Engine Control Μodule (ECΜ) Controlled Vacuum Switch Valve or EGR Solenoid and an EGR Vacuum Μodulator. Common causes include Exhaust Gas Recirculation (EGR) volume control valve stuck closed, Faulty Exhaust Gas Recirculation (EGR) volume control solenoid valve, Faulty EGR Valve. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P0400 Infiniti indicates Exhaust Gas Recirculation Function- No/Low Flow Detected.
- Common causes
- Common causes include Exhaust Gas Recirculation (EGR) volume control valve stuck closed, Faulty Exhaust Gas Recirculation (EGR) volume control solenoid valve, Faulty EGR Valve.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Code P0400 Infiniti Description
The EGR system on recently built vehicles uses a step motor to control the flow rate of EGR from exhaust manifold. This motor has four winding phases. It operates according to the output pulse signal of the ECΜ. Two windings are turned ON and OFF in sequence. Each time an ON pulse is issued, the valve opens or closes, changing the flow rate. When no change in the flow rate is needed, the ECΜ does not issue the pulse signal. Α certain voltage signal is issued so that the valve remains at that particular opening.
What are the Possible Causes of the DTC P0400 Infiniti?
- Exhaust Gas Recirculation (EGR) volume control valve stuck closed
- Faulty Exhaust Gas Recirculation (EGR) volume control solenoid valve
- Faulty EGR Valve
- Faulty EGR temperature sensor and circuit
- Exhaust Gas Recirculation (EGR) solenoid valve harness is open or shorted
- Exhaust Gas Recirculation (EGR) solenoid valve circuit poor electrical connection
- Dead (Weak) battery
How to Fix the DTC P0400 Infiniti?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0400 Infiniti code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0400 Infiniti code?
Need more information on how to fix the P0400 Infiniti code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0400 Infiniti code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0400 Infiniti Code
No Frequently Asked Questions about P0400 Infiniti Code found.
Discuss the causes and fixes for P0400 Infiniti OBDII Code
Code P0400 Infiniti comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.