P0394 2011 Ford Fusion Code - Camshaft Position Sensor 'B' Circuit Intermittent Bank 2
Quick Answer
The Camshaft Position Sensor is an electronic device used in an engine to record the rate at which the camshaft is spinning. Common causes include Faulty Camshaft Position Sensor, Camshaft Position Sensor harness is open or shorted, Camshaft Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0394 2011 Ford Fusion indicates Camshaft Position Sensor 'B' Circuit Intermittent Bank 2.
- Common causes
- Common causes include Faulty Camshaft Position Sensor, Camshaft Position Sensor harness is open or shorted, Camshaft Position Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0394 2011 Ford Fusion Description
When the engine is running, the high and low parts of the teeth cause the gap with the sensor to change. The changing gap causes the magnetic field near the sensor to change. The change in the magnetic field cause the voltage from the sensor to change.
When the crankshaft position sensor (POS) system becomes inoperative, the camshaft position sensor provides various controls of engine parts instead, utilizing timing of cylinder identification signals.
What are the Possible Causes of the DTC P0394 2011 Ford Fusion?
- Faulty Camshaft Position Sensor
- Camshaft Position Sensor harness is open or shorted
- Camshaft Position Sensor circuit poor electrical connection
- Faulty starter motor
- Starting system circuit
- Dead (Weak) battery
How to Fix the DTC P0394 2011 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0394 2011 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0394 2011 Ford Fusion code?
Need more information on how to fix the P0394 2011 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0394 2011 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0394 2011 Ford Fusion Code
1. What are the common symptoms of OBDII code P0394 in a 2011 Ford Fusion?
- Common symptoms include engine misfires, rough idling, poor acceleration, and potentially stalling.
2. What does the OBDII code P0394 on a 2011 Ford Fusion indicate?
- The code P0394 indicates an issue with the Camshaft Position Sensor 'B' Circuit Intermittent Bank 2.
3. What are the possible causes of OBDII code P0394 in a 2011 Ford Fusion?
- Possible causes include a faulty camshaft position sensor, wiring issues, sensor connection problems, or a malfunctioning engine control module (ECM).
4. How can I diagnose the Camshaft Position Sensor 'B' Circuit Intermittent Bank 2 issue in my 2011 Ford Fusion?
- You can diagnose the issue by performing a visual inspection of the sensor and its wiring, checking for loose connections, using an OBDII scanner to read the code and data, and conducting voltage tests.
5. Can I continue driving my 2011 Ford Fusion with OBDII code P0394?
- It is not recommended to drive with this code as it can lead to further engine problems and potential breakdowns. It's advisable to address the issue promptly.
6. How can I repair OBDII code P0394 in my 2011 Ford Fusion?
- Repair options include replacing the faulty camshaft position sensor, repairing or replacing damaged wiring, ensuring proper sensor connections, and resetting the ECM.
7. Is it possible to clear the OBDII code P0394 in a 2011 Ford Fusion without fixing the issue?
- While you can clear the code temporarily, it is not a permanent solution as the underlying problem causing the code will persist and may lead to further issues.
8. How much does it typically cost to repair OBDII code P0394 in a 2011 Ford Fusion?
- The cost of repair can vary depending on the cause of the issue, but it may range from $100 to $300 for parts and labor.
9. Can a DIY enthusiast fix OBDII code P0394 in a 2011 Ford Fusion?
- Depending on your skill level and access to tools, some DIY enthusiasts may be able to replace the camshaft position sensor or address wiring issues. However, complex ECM-related problems may require professional assistance.
10. How can I prevent OBDII code P0394 from recurring in my 2011 Ford Fusion?
- To prevent the code from recurring, regularly maintain your vehicle, address any engine performance issues promptly, and ensure timely inspections and repairs when warning signs appear.
Discuss the causes and fixes for P0394 2011 Ford Fusion OBDII Code
Code P0394 2011 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
