AutoCodes – GMC – P0381 2017 GMC Sierra

P0381 2017 GMC Sierra Code - Wait To Start Indicator Control Circuit

Quick Answer

Ignition voltage is supplied directly to the Wait To Start indicator. Common causes include Faulty Instrument Cluster, Instrument Cluster harness is open or shorted, Instrument Cluster circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0381 2017 GMC Sierra indicates Wait To Start Indicator Control Circuit.
Common causes: Common causes include Faulty Instrument Cluster, Instrument Cluster harness is open or shorted, Instrument Cluster circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 241

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 17, 2022

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0381 2017 GMC Sierra Description

Ignition voltage is supplied directly to the Wait To Start indicator. The Engine Control Module (ECM) controls the lamp by grounding the control circuit via an internal switch called a driver. The primary function of the driver is to supply the ground for the component being controlled. Each driver has a fault line which is monitored by the ECM. When the ECM is commanding a component ON, the voltage of the control circuit should be low, near zero volts. When the ECM is commanding the control circuit to a component OFF, the voltage potential of the circuit should be high, near battery voltage. The Diagnostic Trouble Code (DTC) will be set when the ECM detects an open circuit on the Wait To Start Indicator Control circuit for greater than 0.2 s.

OBDII Code P0381 2017 GMC Sierra - Wait To Start Indicator Control Circuit - AutoCodes.com — P0381 2017 GMC Sierra Code - Wait To Start Indicator Control Circuit

What does this mean?

What are the Possible Causes of the DTC P0381 2017 GMC Sierra?

Faulty Instrument Cluster
Instrument Cluster harness is open or shorted
Instrument Cluster circuit poor electrical connection
Faulty Engine Control Module (ECM)

How to Fix the DTC P0381 2017 GMC Sierra?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0381 2017 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0381 2017 GMC Sierra code?

Need more information on how to fix the P0381 2017 GMC Sierra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0381 2017 GMC Sierra code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0381 2017 GMC Sierra Code

1. What does the OBDII code P0381 mean on a 2017 GMC Sierra?

P0381 indicates an issue with the Wait To Start Indicator Control Circuit, which is responsible for signaling when the glow plugs are ready in diesel engines.

2. What are the symptoms of code P0381 in a 2017 GMC Sierra?

Common symptoms include the Wait To Start indicator not illuminating, hard starting in cold weather, or no noticeable performance issues in some cases.

3. What causes the P0381 code on a 2017 GMC Sierra?

Possible causes include a faulty Wait To Start indicator bulb, damaged wiring or connectors in the control circuit, a defective glow plug control module, or a malfunctioning PCM.

4. Can I drive my 2017 GMC Sierra with a P0381 code?

Yes, you can drive the vehicle with this code, but starting the engine in cold weather may become difficult, and the issue should be addressed to avoid further problems.

5. How is the P0381 code diagnosed on a 2017 GMC Sierra?

A technician will check the bulb, wiring, and connectors for damage, test the glow plug control module, and use a scan tool to monitor the Wait To Start circuit operation.

6. How do you fix the P0381 code on a 2017 GMC Sierra?

Repairs may involve replacing the Wait To Start indicator bulb, repairing damaged wiring or connectors, replacing the glow plug control module, or reprogramming the PCM if necessary.

7. Can a dead bulb cause the P0381 code in a 2017 GMC Sierra?

Yes, a burned-out Wait To Start indicator bulb is a common cause of this code and should be checked first.

8. Is the P0381 code specific to diesel engines only?

Yes, it is specific to diesel engines, as the Wait To Start indicator is related to the glow plug system used for cold starts.

9. What tools are needed to diagnose a P0381 code on a 2017 GMC Sierra?

Youâ€™ll need a scan tool, a multimeter to check voltage and continuity, and potentially a wiring diagram for the Wait To Start circuit.

10. How much does it cost to fix the P0381 code on a 2017 GMC Sierra?

The cost depends on the exact cause, but replacing a bulb or fixing wiring can cost $50-$150, while replacing the glow plug control module may cost $300-$500.