AutoCodes – GMC – P037A 2016 GMC Sierra

P037A 2016 GMC Sierra Code - Wait To Start Indicator Control Circuit Low Voltage

Quick Answer

Ignition voltage is supplied directly to the Wait To Start indicator. Common causes include Faulty Instrument Cluster, Instrument Cluster harness is open or shorted, Instrument Cluster circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P037A 2016 GMC Sierra indicates Wait To Start Indicator Control Circuit Low Voltage.
Common causes: Common causes include Faulty Instrument Cluster, Instrument Cluster harness is open or shorted, Instrument Cluster circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 192

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 17, 2022

Description
Possible Causes
How To Fix
Cost to Diagnose
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P037A 2016 GMC Sierra Description

Ignition voltage is supplied directly to the Wait To Start indicator. The Engine Control Module (ECM) controls the lamp by grounding the control circuit via an internal switch called a driver. The primary function of the driver is to supply the ground for the component being controlled. Each driver has a fault line which is monitored by the ECM. When the ECM is commanding a component ON, the voltage of the control circuit should be low, near zero volts. When the ECM is commanding the control circuit to a component OFF, the voltage potential of the circuit should be high, near battery voltage. The Diagnostic Trouble Code (DTC) will be set when the ECM detects a short to ground on the Wait To Start Indicator Control circuit for greater than 3 s.

OBDII Code P037A 2016 GMC Sierra - Wait To Start Indicator Control Circuit Low Voltage - AutoCodes.com — P037A 2016 GMC Sierra Code - Wait To Start Indicator Control Circuit Low Voltage

What does this mean?

What are the Possible Causes of the DTC P037A 2016 GMC Sierra?

Faulty Instrument Cluster
Instrument Cluster harness is open or shorted
Instrument Cluster circuit poor electrical connection
Faulty Engine Control Module (ECM)

How to Fix the DTC P037A 2016 GMC Sierra?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P037A 2016 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P037A 2016 GMC Sierra code?

Need more information on how to fix the P037A 2016 GMC Sierra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P037A 2016 GMC Sierra code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.