AutoCodes – Chrysler – P0369 Chrysler

P0369 Chrysler Code - Camshaft Position Sensor Intermittent Bank 1 Sensor 2

Quick Answer

The circuits of the Camshaft Position (CMP) Sensor include a 5-Volt reference circuit supplied by the Powertrain Control Module (PCM), a low reference circuit, and an output signal circuit. Common causes include Low engine oil, Faulty Camshaft Position (CMP) Sensor, Camshaft Position Sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0369 Chrysler indicates Camshaft Position Sensor Intermittent Bank 1 Sensor 2.
Common causes: Common causes include Low engine oil, Faulty Camshaft Position (CMP) Sensor, Camshaft Position Sensor harness is open or shorted.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 10,074

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jul 08, 2024

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0369 Chrysler Description

The circuits of the Camshaft Position (CMP) Sensor include a 5-Volt reference circuit supplied by the Powertrain Control Module (PCM), a low reference circuit, and an output signal circuit. This sensor is a digitally integrated device with an internal magnetic bias. It detects changes in magnetic flux between the high and low points of a tone wheel connected to the camshaft. As each tooth on the tone wheel passes by the CMP Sensor, the sensor electronics use the resulting change in the magnetic field to generate a digital output pulse. The sensor produces a digital ON/OFF DC voltage pulse, and the frequency of this pulse varies depending on the number of output pulses per revolution of the camshaft, corresponding to the pattern on the camshaft tone wheel. The speed of the camshaft determines the frequency of the CMP Sensor output. The PCM interprets the tooth pattern to determine the camshaft's position. This information is then utilized to synchronize the engine's ignition timing and fuel injection events. Additionally, the PCM uses the CMP Sensor output data to ascertain the relative position of the camshaft to the Crankshaft, enabling control of the CMP Actuator if it is present.
A Diagnostic Trouble Code (DTC) is set if the PCM detects an intermittent signal error from the Camshaft 1/2 Position Sensor.

OBDII Code P0369 Chrysler - Camshaft Position Sensor Intermittent Bank 1 Sensor 2 - AutoCodes.com — P0369 Chrysler Code - Camshaft Position Sensor Intermittent Bank 1 Sensor 2

What does this mean?

What are the Possible Causes of the DTC P0369 Chrysler?

Low engine oil
Faulty Camshaft Position (CMP) Sensor
Camshaft Position Sensor harness is open or shorted
Camshaft Position Sensor circuit poor electrical connection
Faulty Powertrain Control Module (PCM)
Camshaft Tone Wheel loose/damaged or misaligned
Dead (Weak) battery

How to Fix the DTC P0369 Chrysler?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

In the event of a failure in either the Crankshaft Position (CKP) Sensor or the Camshaft Position (CMP) Sensor, the engine can still start. The Powertrain Control Module (PCM) is capable of determining the engine position and initiating startup based on one of these two inputs. However, there may be a slight delay in starting as the PCM needs time to establish synchronization. If either the CKP or CMP Sensor signals are absent during engine cranking, a Diagnostic Trouble Code (DTC) is recorded, and the Malfunction Indicator Lamp (MIL) lights up.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0369 Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0369 Chrysler code?

Need more information on how to fix the P0369 Chrysler code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0369 Chrysler code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.