P0366 Dodge Code - Camshaft Position Sensor Performance Bank 1 Sensor 2
Quick Answer
The circuits of the Camshaft Position (CMP) Sensor include a 5-Volt reference circuit supplied by the Powertrain Control Module (PCM), a low reference circuit, and an output signal circuit. Common causes include Faulty Camshaft Position (CMP) Sensor, Camshaft Position Sensor harness is open or shorted, Camshaft Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0366 Dodge indicates Camshaft Position Sensor Performance Bank 1 Sensor 2.
- Common causes
- Common causes include Faulty Camshaft Position (CMP) Sensor, Camshaft Position Sensor harness is open or shorted, Camshaft Position Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0366 Dodge Description
A Diagnostic Trouble Code (DTC) is set if the PCM receives either no signal or an incorrect signal from the Camshaft 1/2 Position Sensor.
What are the Possible Causes of the DTC P0366 Dodge?
- Faulty Camshaft Position (CMP) Sensor
- Camshaft Position Sensor harness is open or shorted
- Camshaft Position Sensor circuit poor electrical connection
- Faulty Powertrain Control Module (PCM)
- Camshaft Tone Wheel loose/damaged or misaligned
- Dead (Weak) battery
How to Fix the DTC P0366 Dodge?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0366 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0366 Dodge code?
Need more information on how to fix the P0366 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0366 Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0366 Dodge Code
1. What does the OBDII code P0366 mean on a Dodge vehicle?
P0366 indicates a performance issue with the camshaft position sensor on Bank 1 Sensor 2, meaning the sensor’s signal is erratic or outside expected parameters.
2. What are the common symptoms of code P0366 in a Dodge vehicle?
Symptoms may include engine misfires, rough idle, reduced power, difficulty starting, and the Check Engine Light turning on.
3. What causes the P0366 code on a Dodge vehicle?
Common causes include a faulty camshaft position sensor, damaged wiring or connectors, misaligned timing components, or issues with the engine control module (ECM).
4. Can a faulty camshaft position sensor cause the P0366 code?
Yes, a defective or failing camshaft position sensor is often the primary cause of this code.
5. How can I diagnose a P0366 code on my Dodge?
Use an OBDII scanner to confirm the code, visually inspect the wiring and connectors, test the camshaft position sensor’s output signal, and check the engine timing.
6. Can I drive my Dodge vehicle with code P0366?
Driving with this code is not recommended as it can lead to engine performance issues or further damage if the problem is not resolved.
7. How do I fix a P0366 code on my Dodge vehicle?
Repairs may include replacing the camshaft position sensor, repairing damaged wiring or connectors, or addressing timing issues in the engine.
8. How much does it cost to repair the P0366 code on a Dodge?
Costs vary, but replacing the camshaft position sensor typically ranges from $100 to $300, including parts and labor.
9. Can a dirty or contaminated camshaft position sensor trigger the P0366 code?
Yes, dirt or oil contamination on the sensor can interfere with its performance and cause this code.
10. Will resetting the Check Engine Light clear the P0366 code permanently?
Resetting the light may clear the code temporarily, but the underlying issue must be fixed to prevent the code from returning.
Discuss the causes and fixes for P0366 Dodge OBDII Code
Code P0366 Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
