P0365 2017 Honda CR-V Code - Camshaft Position Sensor 'B' Circuit No Signal
Quick Answer
The Camshaft Position (CMP) Sensor 'B' consists of a rotor and a semiconductor that detects the rotor position. Common causes include Faulty Camshaft Position (CMP) Sensor 'B', Camshaft Position Sensor 'B' harness is open or shorted, Camshaft Position Sensor 'B' circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0365 2017 Honda CR-V indicates Camshaft Position Sensor 'B' Circuit No Signal.
- Common causes
- Common causes include Faulty Camshaft Position (CMP) Sensor 'B', Camshaft Position Sensor 'B' harness is open or shorted, Camshaft Position Sensor 'B' circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0365 2017 Honda CR-V Description
What are the Possible Causes of the DTC P0365 2017 Honda CR-V?
- Faulty Camshaft Position (CMP) Sensor 'B'
- Camshaft Position Sensor 'B' harness is open or shorted
- Camshaft Position Sensor 'B' circuit poor electrical connection
- Faulty Powertrain Control Module (PCM)
How to Fix the DTC P0365 2017 Honda CR-V?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0365 2017 Honda CR-V code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0365 2017 Honda CR-V code?
Need more information on how to fix the P0365 2017 Honda CR-V code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0365 2017 Honda CR-V code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0365 2017 Honda CR-V Code
1. What does the OBDII code P0365 mean on a 2017 Honda CR-V?
P0365 indicates a "Camshaft Position Sensor 'B' Circuit No Signal," meaning the ECM is not receiving a signal from the exhaust camshaft position sensor on Bank 1.
2. What are the symptoms of code P0365 in a 2017 Honda CR-V?
Common symptoms include poor engine performance, rough idling, reduced fuel efficiency, difficulty starting, and the Check Engine Light being illuminated.
3. What causes the P0365 code on a 2017 Honda CR-V?
Causes may include a faulty camshaft position sensor, damaged wiring or connectors, a failed ECM, or issues with the timing components.
4. How do I fix the P0365 code on my 2017 Honda CR-V?
Repairs typically involve replacing the faulty camshaft position sensor, repairing damaged wiring or connectors, or checking and replacing timing components if necessary.
5. Can I drive my 2017 Honda CR-V with a P0365 code?
While the car may still run, driving with this code is not recommended as it can lead to poor engine performance and potential damage to other components.
6. Where is the camshaft position sensor 'B' located on a 2017 Honda CR-V?
Sensor 'B' is typically located near the exhaust camshaft on Bank 1, which is the side of the engine with cylinder 1.
7. How much does it cost to repair a P0365 code on a 2017 Honda CR-V?
The repair cost varies but generally ranges from $100 to $300, depending on whether only the sensor needs replacement or if additional components require repair.
8. Can a bad camshaft position sensor cause a P0365 code?
Yes, a defective camshaft position sensor is one of the most common causes of the P0365 code.
9. How do I diagnose the P0365 code on a 2017 Honda CR-V?
Diagnosis involves using an OBDII scanner to confirm the code, visually inspecting the sensor and wiring, and testing the sensor’s electrical signals with a multimeter.
10. Will clearing the P0365 code fix the issue on my 2017 Honda CR-V?
Clearing the code may temporarily remove the Check Engine Light, but the underlying issue must be repaired to prevent the code from returning.
Discuss the causes and fixes for P0365 2017 Honda CR-V OBDII Code
Code P0365 2017 Honda CR-V comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
