P0365 2016 Honda CR-V Code - Camshaft Position Sensor 'B' Circuit No Signal

P0365 indicates a "Camshaft Position Sensor 'B' Circuit No Signal," meaning the engine control module (ECM) is not receiving the expected signal from the camshaft position sensor on Bank 1.

Symptoms include rough idling, poor acceleration, reduced fuel efficiency, difficulty starting, and the Check Engine Light turning on.

Common causes include a malfunctioning camshaft position sensor, damaged wiring or connectors, a faulty ECM, or mechanical issues such as a worn timing chain.

Driving with this code is not recommended as it can lead to poor engine performance, increased fuel consumption, and potential long-term engine damage.

Diagnosis involves inspecting the camshaft position sensor, checking wiring and connectors for damage, and verifying timing chain alignment. A scan tool may also be used to monitor live data.

Repairs might include replacing the camshaft position sensor, repairing or replacing damaged wires or connectors, or addressing mechanical timing issues.

Repair costs vary but typically range from $100 to $300 for parts and labor, depending on whether the camshaft position sensor or wiring needs replacement.

The camshaft position sensor 'B' is typically located near the exhaust camshaft on Bank 1 of the engine.

Yes, a faulty or malfunctioning camshaft position sensor is one of the most common causes of the P0365 code.

Clearing the code might turn off the Check Engine Light temporarily, but the underlying issue must be diagnosed and repaired to prevent the code from returning.