AutoCodes – Honda – P0365 2010 Honda Accord

P0365 2010 Honda Accord Code - Camshaft Position Sensor 'B' No Signal

Quick Answer

The Camshaft Position Sensor is an electronic device used in an engine to record the rate at which the camshaft is spinning. Common causes include Faulty Camshaft Position Sensor, Camshaft Position Sensor harness is open or shorted, Camshaft Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0365 2010 Honda Accord indicates Camshaft Position Sensor 'B' No Signal.
Common causes: Common causes include Faulty Camshaft Position Sensor, Camshaft Position Sensor harness is open or shorted, Camshaft Position Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 12,949

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0365 2010 Honda Accord Description

The Camshaft Position Sensor is an electronic device used in an engine to record the rate at which the camshaft is spinning. This information is used by the Engine Control Module (ECM) to control ignition and fuel injection. The camshaft position sensor senses the retraction of camshaft (intake) to identify a particular cylinder. The camshaft position sensor senses the piston position. The sensor system consists of a rotating part, typically a disc, as well as a static part, the actual sensor.
When the engine is running, the high and low parts of the teeth cause the gap with the sensor to change. The changing gap causes the magnetic field near the sensor to change. The change in the magnetic field cause the voltage from the sensor to change.
When the crankshaft position sensor (POS) system becomes inoperative, the camshaft position sensor provides various controls of engine parts instead, utilizing timing of cylinder identification signals.

OBDII Code P0365 2010 Honda Accord - Camshaft Position Sensor 'B' No Signal - AutoCodes.com — P0365 2010 Honda Accord Code - Camshaft Position Sensor 'B' No Signal

What does this mean?

What are the Possible Causes of the DTC P0365 2010 Honda Accord?

Faulty Camshaft Position Sensor
Camshaft Position Sensor harness is open or shorted
Camshaft Position Sensor circuit poor electrical connection
Faulty starter motor
Starting system circuit
Dead (Weak) battery

How to Fix the DTC P0365 2010 Honda Accord?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0365 2010 Honda Accord code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0365 2010 Honda Accord code?

Need more information on how to fix the P0365 2010 Honda Accord code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0365 2010 Honda Accord code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0365 2010 Honda Accord Code

1. What are the common symptoms of OBDII code P0365 in a 2010 Honda Accord?

The common symptoms include rough idling, engine misfires, stalling, and possibly difficulty starting the vehicle.

2. What does the OBDII code P0365 in a 2010 Honda Accord indicate?

The code P0365 indicates a malfunction in the Camshaft Position Sensor 'B', specifically, a lack of signal being received by the ECM.

3. What are the possible causes of OBDII code P0365 in a 2010 Honda Accord?

Possible causes include a faulty camshaft position sensor, wiring issues, sensor connection problems, or a damaged sensor.

4. How can I diagnose the cause of OBDII code P0365 in my 2010 Honda Accord?

You can diagnose the issue by visually inspecting the sensor and its connections, testing the sensor for proper voltage output, and checking for any damaged wiring.

5. Can I still drive my 2010 Honda Accord with OBDII code P0365 present?

It is generally not recommended to drive the vehicle with this code present, as it can lead to further engine damage or potential safety hazards.

6. How can I repair OBDII code P0365 in my 2010 Honda Accord?

To repair this issue, you may need to replace the camshaft position sensor 'B' with a new one and ensure all wiring connections are secure and free of damage.

7. Are there any DIY tips for fixing OBDII code P0365 in a 2010 Honda Accord?

While some may attempt to replace the sensor themselves, it is recommended to consult a professional mechanic to ensure proper installation and diagnosis of the issue.

8. Will resetting the OBDII code P0365 in my 2010 Honda Accord make it go away permanently?

Resetting the code may temporarily clear the warning light, but if the underlying issue is not fixed, the code is likely to reappear after driving the vehicle for some time.

9. Is OBDII code P0365 a common issue in 2010 Honda Accords?

While it may not be extremely common, issues with camshaft position sensors can occur in various vehicles, including the 2010 Honda Accord.

10. How much does it typically cost to repair OBDII code P0365 in a 2010 Honda Accord?

Repair costs can vary depending on the exact cause of the issue, but replacing the camshaft position sensor 'B' in a 2010 Honda Accord can range from $100 to $300, including parts and labor.