AutoCodesMercedes-Benz – P0356 Mercedes-Benz

P0356 Mercedes-Benz Code - Ignition Coil 6 Primary/Secondary Circuit Malfunction

Quick Answer

The ignition system on the vehicle uses individual ignition coils for each cylinder. Common causes include Faulty Ignition Coil 6, Ignition Coil 6 harness is open or shorted, Ignition Coil 6 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0356 Mercedes-Benz indicates Ignition Coil 6 Primary/Secondary Circuit Malfunction.
Common causes
Common causes include Faulty Ignition Coil 6, Ignition Coil 6 harness is open or shorted, Ignition Coil 6 circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 18,540
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Jun 14, 2020
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0356 Mercedes-Benz Description

The ignition system on the vehicle uses individual ignition coils for each cylinder. The Engine Control Module (ECM) controls each ignition coil operation. The ECM sends a ON/OFF signal to energize the ignition coil to create a spark at the spark plug when a spark is required at the cylinder.
OBDII Code P0356 Mercedes-Benz - Ignition Coil 6 Primary/Secondary Circuit Malfunction - AutoCodes.com
P0356 Mercedes-Benz Code - Ignition Coil 6 Primary/Secondary Circuit Malfunction

What are the Possible Causes of the DTC P0356 Mercedes-Benz?

  • Faulty Ignition Coil 6
  • Ignition Coil 6 harness is open or shorted
  • Ignition Coil 6 circuit poor electrical connection
  • Faulty Engine Control Module (ECM)

How to Fix the DTC P0356 Mercedes-Benz?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0356 Mercedes-Benz code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0356 Mercedes-Benz code?

Need more information on how to fix the P0356 Mercedes-Benz code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0356 Mercedes-Benz code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0356 Mercedes-Benz Code

Q: What does the OBDII code P0356 mean on a Mercedes-Benz?

1. **A:** Code P0356 indicates a malfunction in the ignition coil 6 primary or secondary circuit, which may affect the engine's ability to ignite fuel properly. 2.

Q: What are the common symptoms of P0356 on a Mercedes-Benz?

**A:** Symptoms may include engine misfire, reduced performance, rough idling, poor fuel economy, and the check engine light illuminating. 3.

Q: What causes the P0356 code on a Mercedes-Benz?

**A:** Common causes include a faulty ignition coil, damaged wiring or connectors in the ignition coil 6 circuit, or a malfunctioning engine control module (ECM). 4.

Q: Can I drive my Mercedes-Benz with the P0356 code?

**A:** While the vehicle may still run, driving with this code can cause engine damage, reduced performance, and higher emissions, so it’s best to address it promptly. 5.

Q: How do I diagnose the P0356 code on my Mercedes-Benz?

**A:** Start by inspecting the ignition coil 6, its wiring, and connectors for damage. Use a multimeter to test the coil and check for proper voltage and continuity. 6.

Q: How do I fix the P0356 code on a Mercedes-Benz?

**A:** Repairs may include replacing the faulty ignition coil, repairing damaged wiring or connectors, or reprogramming or replacing the ECM if necessary. 7.

Q: Can a bad spark plug cause the P0356 code in a Mercedes-Benz?

**A:** While rare, a bad spark plug in cylinder 6 can contribute to ignition issues and should be inspected when diagnosing this code. 8.

Q: How much does it cost to repair the P0356 code on a Mercedes-Benz?

**A:** Repair costs vary but typically range from $100 to $300 for parts and labor, depending on whether the ignition coil, wiring, or other components need replacement. 9.

Q: Will clearing the P0356 code solve the problem on my Mercedes-Benz?

**A:** Clearing the code will remove it temporarily, but if the underlying issue isn’t resolved, the code will return. 10.

Q: Can a failing ECM cause the P0356 code on a Mercedes-Benz?

**A:** Yes, though less common, a failing ECM can cause improper signals to the ignition coil, triggering this code. It should be tested after ruling out other causes.

Discuss the causes and fixes for P0356 Mercedes-Benz OBDII Code

Code P0356 Mercedes-Benz comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play