AutoCodesToyota – P0355 2006 Toyota Highlander

P0355 2006 Toyota Highlander Code - Ignition Coil 5 Primary/Secondary Circuit

Quick Answer

The ignition system on the vehicle uses individual ignition coils for each cylinder. Common causes include Faulty Ignition Coil 5, Ignition Coil 5 harness is open or shorted, Ignition Coil 5 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0355 2006 Toyota Highlander indicates Ignition Coil 5 Primary/Secondary Circuit.
Common causes
Common causes include Faulty Ignition Coil 5, Ignition Coil 5 harness is open or shorted, Ignition Coil 5 circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 3,438
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Jun 14, 2020
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0355 2006 Toyota Highlander Description

The ignition system on the vehicle uses individual ignition coils for each cylinder. The Engine Control Module (ECM) controls each ignition coil operation. The ECM sends a ON/OFF signal to energize the ignition coil to create a spark at the spark plug when a spark is required at the cylinder.
OBDII Code P0355 2006 Toyota Highlander - Ignition Coil 5 Primary/Secondary Circuit - AutoCodes.com
P0355 2006 Toyota Highlander Code - Ignition Coil 5 Primary/Secondary Circuit

What are the Possible Causes of the DTC P0355 2006 Toyota Highlander?

  • Faulty Ignition Coil 5
  • Ignition Coil 5 harness is open or shorted
  • Ignition Coil 5 circuit poor electrical connection
  • Faulty Engine Control Module (ECM)

How to Fix the DTC P0355 2006 Toyota Highlander?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0355 2006 Toyota Highlander code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0355 2006 Toyota Highlander code?

Need more information on how to fix the P0355 2006 Toyota Highlander code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0355 2006 Toyota Highlander code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0355 2006 Toyota Highlander Code

1. What does the OBDII code P0355 mean for a 2006 Toyota Highlander?

P0355 indicates a malfunction in the ignition coil "E" (cylinder 5) primary or secondary circuit, which may affect engine performance.

2. What are the common symptoms of a P0355 code?

Symptoms include engine misfires, rough idling, reduced power, poor fuel economy, and the Check Engine Light being illuminated.

3. What causes the P0355 code to appear?

Possible causes include a faulty ignition coil, damaged wiring or connectors in the ignition circuit, a malfunctioning PCM (Powertrain Control Module), or a bad spark plug.

4. How can I locate cylinder 5 in my 2006 Toyota Highlander?

Cylinder 5 is located on the rear bank of the engine (closest to the firewall) in the V6 engine configuration. Refer to the firing order diagram for clarity.

5. Can I still drive my Toyota Highlander with a P0355 code?

Driving with this code is not recommended as it can cause further damage to the engine or catalytic converter due to unburned fuel from misfires.

6. How do I diagnose a P0355 code?

Start by inspecting the ignition coil for cylinder 5, checking for damaged wiring or loose connections, and testing the coil with a multimeter. A scan tool can also help verify misfire data.

7. How do I fix a P0355 code on my 2006 Toyota Highlander?

Repairs may include replacing the faulty ignition coil, repairing damaged wiring or connectors, replacing the spark plug, or reprogramming/updating the PCM.

8. How much does it cost to fix a P0355 code?

The cost varies depending on the repair, but replacing an ignition coil typically costs $100–$300, including parts and labor.

9. Can a bad spark plug cause the P0355 code?

Yes, a worn or damaged spark plug can cause the ignition coil to malfunction, triggering the P0355 code.

10. Will clearing the P0355 code with a scan tool fix the problem?

Clearing the code will turn off the Check Engine Light temporarily, but the underlying issue must be resolved to prevent the code from returning.

Discuss the causes and fixes for P0355 2006 Toyota Highlander OBDII Code

Code P0355 2006 Toyota Highlander comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play