P0353 Mazda Code - Ignition Coil Primary Circuit Fault Cylinder 3
Quick Answer
The ignition system on the vehicle uses individual ignition coils for each cylinder. Common causes include Faulty Ignition Coil 3, Ignition Coil 3 harness is open or shorted, Ignition Coil 3 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0353 Mazda indicates Ignition Coil Primary Circuit Fault Cylinder 3.
- Common causes
- Common causes include Faulty Ignition Coil 3, Ignition Coil 3 harness is open or shorted, Ignition Coil 3 circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0353 Mazda Description
What are the Possible Causes of the DTC P0353 Mazda?
- Faulty Ignition Coil 3
- Ignition Coil 3 harness is open or shorted
- Ignition Coil 3 circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P0353 Mazda?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0353 Mazda code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0353 Mazda code?
Need more information on how to fix the P0353 Mazda code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0353 Mazda code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0353 Mazda Code
What does the OBDII code P0353 mean for a Mazda?
P0353 indicates an issue with the ignition coil primary circuit in cylinder 3, which may disrupt proper ignition timing and engine performance.
What are the common symptoms of P0353 in a Mazda?
Symptoms include engine misfires, rough idling, reduced power, difficulty starting, and potentially an illuminated check engine light.
What causes P0353 in a Mazda?
Common causes include a faulty ignition coil, damaged wiring or connectors in the ignition circuit, a bad spark plug, or a malfunctioning PCM.
Can driving with code P0353 damage my Mazda?
Driving with P0353 can cause further damage to the ignition system and catalytic converter due to unburned fuel, so prompt diagnosis and repair are recommended.
How do I diagnose code P0353 in a Mazda?
Check the ignition coil for cylinder 3, inspect wiring and connectors for damage, test the spark plug, and ensure the PCM is functioning properly.
What tools are needed to fix P0353 on a Mazda?
You may need an OBDII scanner, a multimeter for testing circuits, ignition coil replacement tools, and basic hand tools.
Can a bad spark plug cause P0353 on a Mazda?
Yes, a bad spark plug or improper gap can cause ignition coil issues, triggering the P0353 code.
How much does it cost to repair P0353 on a Mazda?
Repair costs vary but typically range from $100 to $300 for ignition coil or wiring repairs, depending on the exact issue.
Should I replace all ignition coils if one fails on my Mazda?
It’s not always necessary, but replacing all coils can prevent future issues, especially if they are older or have similar wear.
Can a PCM failure trigger P0353 on a Mazda?
Yes, a malfunctioning PCM may fail to send proper signals to the ignition coil, causing the P0353 code.
Discuss the causes and fixes for P0353 Mazda OBDII Code
Code P0353 Mazda comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
